Engine Oil Filter Base - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position engine oil filter base (4) on the engine. Install bolts (1) and bolts (2).
- Install engine oil filters (3).
- Fill the lubrication system with engine oil. Refer to Operation and Maintenance Manual, "Refill Capacities".
Show/hide table
| |
| Illustration 1 | g01182270 |
Caterpillar Information System:
C32 Marine and Auxiliary Marine Engines Engine Oil Filter Base - Assemble
3126B Petroleum Engine Flywheel - Remove and Install
3126B Petroleum Engine Water Temperature Regulator - Remove and Install
C32 Marine and Auxiliary Marine Engines Engine Oil Filter Base - Disassemble
C18 Petroleum Generator Sets Generator Lead Connections
3126B Petroleum Engine Water Temperature Regulator Housing - Remove and Install
C7.1 (Mech) Industrial Engine Gear Group (Front)
Caterpillar 270 Air Compressor Discharge Valve Leakage - Test
Caterpillar 270 Air Compressor Air Compressor Governor - Test and Adjust
Caterpillar 270 Air Compressor Excessive Oil at Exhaust Ports or Air Strainer
Caterpillar 270 Air Compressor Excessive Build-Up and Recover Time
C7.1 (Mech) Industrial Engine Oil Pump
C6.6 Engines for Caterpillar Built Machines Crankshaft
C7 and C9 On-Highway Engines Engine Speed - Test
3500 Engines with EUI Option Engine Design
3500 Engines with EUI Option Engine Design
3500 Engines with EUI Option Engine Design
C32 Marine and Auxiliary Marine Engines Engine Oil Cooler - Remove
C7 and C9 On-Highway Engines Turbocharger - Test
Installation Procedure for the Gasket and Front Plate of the 3456 Engine{1151} Installation Procedure for the Gasket and Front Plate of the 3456 Engine{1151}
TH48-E80 Petroleum Transmission Torque Converter Housing
C7 and C9 On-highway Engines Engine Oil Level - Check
C32 Marine and Auxiliary Marine Engines Engine Oil Cooler - Install
2005/07/04 New Software Reduces the Trip Points on the Fuel Pressure Sensor {1718, 7620}