Pivot Shaft Oil Level - Check
Show/hide table
 |
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
 |
Show/hide table
 | |
| Illustration 1 | g00644181 |
The oil plugs are located on both sides of the machine on top of the track roller frame.
- Remove the oil plug on one side of the machine. Check the oil level. The oil level should be at the bottom of the threaded hole.
- If necessary, add oil in order to bring the oil level up to the bottom of the threaded hole.
Reference: See Operation and Maintenance Manual, "Lubricant Viscosities" in this manual for the correct viscosity grade.
- Install the oil plug.
- Repeat Steps 1 through 3 on the other side of the machine.
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Additional Messages
3524B Engine for Caterpillar Built Machines Bearing Clearance - Check
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Transmission Oil Cooler - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Lift Kickout - Adjust
924H, 924HZ, 928HZ and 930H Wheel Loaders Fuel Tank Cap and Strainer - Clean
D6N Track-Type Tractor Hydraulic System Troubleshooting
AD30 Underground Articulated Truck Fire Extinguisher Location
AD30 Underground Articulated Truck Safety Messages
AD30 Underground Articulated Truck Steering System General Information
D6N Track-Type Tractor Hydraulic System Pilot Valve (Steering) - Test and Adjust
D6N Track-Type Tractor Hydraulic System Case Pressure (Steering Pump) - Check
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Transmission Output Gears
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader System Schematic
Troubleshooting Compressed Air System Components and Performance{1803, 5500} Troubleshooting Compressed Air System Components and Performance{1803, 5500}
D6N Track-Type Tractor Power Train Location of Power Train Components
G3500B Engines Lubrication System
966H and 972H Wheel Loaders Quick Coupler - Check - If Equipped
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader General Information
G3500B Engines Cylinder Block, Liners and Heads
G3500B Engines Pistons, Rings and Connecting Rods
3408E and 3412E Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
2003/04/21 A New Yoke Is Now Used in the Lift Cylinder Mounts {5102, 5103, 6068, 7562}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Aftercooler - Remove and Install - Aftercooler Housing with 12 bolts
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Vane Pump (Implement, Pilot, Brake)