Coolant Temperature Sensor
Show/hide table
Illustration 1 | g01089060 |
(1) Sensor assembly
- Tighten the sensor assembly to the following torque. ...
20 ± 3 N·m (15 ± 2 lb ft)
Caterpillar Information System:
C175 Generator Sets High Pressure Fuel Lines
Hydraulic Cylinder Honing {7562} Hydraulic Cylinder Honing {7562}
C7 On-highway Engine Water Lines
Installation of the 264-8897 Auxiliary Sea Water Pump Gp {1371} Installation of the 264-8897 Auxiliary Sea Water Pump Gp {1371}
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
2005/08/01 New Bracket for the Fuel Line {1274}
C-10 Petroleum Engine Inlet and Exhaust Valves - Remove and Install
C-10 Petroleum Engine Inlet and Exhaust Valve Springs - Remove and Install
2005/06/01 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
2005/06/20 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
Cat Commercial Diesel Engine Fluids Recommendations Lubricating Grease
325D and 329D Excavators Hydraulic System Hydraulic Tank and Filter
TH48-E80 Petroleum Transmission Pressure Control Valve (Transmission)
C7 and C9 On-highway Engines Fuel System - Prime
C2.2 Generator Sets Control Panel
349F and 352F Excavators Machine System Specifications Travel Counterbalance Valve
C15 On-Highway Engine Camshaft
C9 Generator Set Safety Messages
C13 On-highway Engine Engine Oil Filter Base
C9 Generator Set Plate Locations and Film Locations
C9 Generator Set Model View Illustrations
C15 On-Highway Engine Crankshaft
C9 Engine for Caterpillar Built Machines Turbocharger - Remove