Hydraulic Tank and Filter
Show/hide table
| |
| 图 1 | g01341123 |
|
(19) 回油滤清器
(25) 液压油箱 (34) 滤芯 (35) 回油室 (36) 油箱室 (37) 吸油滤清器 (38) 管路 (39) 吸入管路 (40) 孔口 (41) 安全阀 (42) 油道 | |
液压油冷却器的回油经过孔口 ( 40) 和油道 (42) 流向回油室 ( 35)。
回油滤清器 (19) 由滤芯 ( 34) 和安全阀 (41) 组成。 回油滤清器安装在液压油箱后表面。
回油经过回油滤清器 ( 19) 的滤芯 (34)。 然后，回油经过管路 ( 38) 流向液压油箱 (25 )。 此后，机油流过吸油滤清器 ( 37)，并经过吸油管 ( 39) 输送至泵。
Show/hide table
| |
| 图 2 | g01341124 |
| (43) 通风装置 | |
通风装置 (43) 位于液压油箱上表面。 通风装置可防止液压油箱中空气压力升高或降低，并且不受以下环境影响：
- 由于油缸移动引起液压油箱中的空气压力变化。
- 由于温度变化引起液压油箱中的空气压力变化。
Caterpillar Information System:
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C175 Generator Sets High Pressure Fuel Lines
Hydraulic Cylinder Honing {7562} Hydraulic Cylinder Honing {7562}
C7 On-highway Engine Water Lines
Installation of the 264-8897 Auxiliary Sea Water Pump Gp {1371} Installation of the 264-8897 Auxiliary Sea Water Pump Gp {1371}
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
2005/08/01 New Bracket for the Fuel Line {1274}
C-10 Petroleum Engine Inlet and Exhaust Valves - Remove and Install
C-10 Petroleum Engine Inlet and Exhaust Valve Springs - Remove and Install
2005/06/01 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
2005/06/20 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
TH48-E80 Petroleum Transmission Pressure Control Valve (Transmission)
C7 and C9 On-highway Engines Fuel System - Prime
C2.2 Generator Sets Control Panel
349F and 352F Excavators Machine System Specifications Travel Counterbalance Valve
C15 On-Highway Engine Camshaft
C9 Generator Set Safety Messages
C13 On-highway Engine Engine Oil Filter Base
C9 Generator Set Plate Locations and Film Locations
C9 Generator Set Model View Illustrations
C15 On-Highway Engine Crankshaft
C9 Engine for Caterpillar Built Machines Turbocharger - Remove
C13 On-highway Engine Front Housing and Covers