Alternator
The 12 Volt and 24 volt Denso Alternators
Five types of alternator are available.
Output
- Two 12 volt alternators are available. ... 100 Amp and 120 Amp
- Two 24 volt alternator ... 55 Amp and 75 Amp
Show/hide table
| |
| Illustration 1 | g01332517 |
|
Typical example | |
(1) Terminal "W"
- Tighten the terminal nut to the following torque. ...
3.7 N·m (33 lb in)
(2) Terminal "D+"
- Tighten the terminal nut to the following torque. ...
3.7 N·m (33 lb in)
(3) Terminal "B+"
- Tighten the terminal nut to the following torque. ...
7 N·m (62 lb in)
The 24 volt Denso HDB Alternator
Show/hide table
| |
| Illustration 2 | g01332518 |
|
Typical example | |
(1) Terminal "G"
- Tighten the nut on the terminal to the following. ...
4 N·m (35 lb in)
(2) The connector "R" has one pin.
(3) Terminal "B"
- Tighten the nut on the terminal to the following torque. ...
18 N·m (13 lb ft)
Output
- The output of the alternator ... 95 Amp
The 12 Volt and 24 Volt Iskra Alternator
Show/hide table
| |
| Illustration 3 | g01332519 |
|
Typical example | |
(1) Terminal "B+"
- Tighten the terminal nut to the following torque. ...
11 N·m (97 lb in)
(2) Terminal "D+"
- Tighten the terminal nut to the following torque. ...
3.3 N·m (29 lb in)
(3) The terminal "W" is spade-type.
12 volt output
- Two alternators are available. ... 150 Amp and 175 Amp
24 volt output
- The 24 volt alternator ... 100 Amp
The 12 Volt Prestolite Alternator
Show/hide table
| |
| Illustration 4 | g01332520 |
|
Typical example | |
(1) Terminal "L"
- Tighten the terminal nut to the following torque. ...
3.1 N·m (27.43 lb in)
(2) The negative terminal "-"
- Tighten the terminal nut to the following torque. ...
8.5 N·m (75.2314 lb in)
(3) The positive terminal "+"
- Tighten the terminal nut to the following torque. ...
11.5 N·m (101.78 lb in)
(4) Terminal "R"
- In order to install a different design of terminal, tighten that terminal to the following torque. ...
3.7 N·m (32.75 lb in)
Output
- The output of the alternator ... 160 Amp
Caterpillar Information System:
C6.6 Industrial Engine Starter Motor
C2.2 Engine and C1.5 Generator Set Electrical System
TH48-E80 Petroleum Transmission Magnetic Screen (Transmission) - Clean
C27 Industrial Engine and C27 Locomotive Engine Reference Material
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Acronyms
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Initial Startup Procedure
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Oil - Change
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Safety Signs and Labels
UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Fire Prevention and Explosion Prevention
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Remote Status Panel
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Electrical System
C7 and C9 On-highway Engines Safety Messages
2006/03/20 270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
G3400 Engines (EIS) Shutdown Relay
C7 and C9 On-highway Engines Engine Crankcase Breather - Clean
C4.4 Marine Generator Set Engines Cylinder Head - Remove
C27 and C32 Industrial Engines Model View Illustrations
3406E Marine Engine Flywheel - Remove
3406E Marine Engine Flywheel - Install
C7.1 Engines for Caterpillar Built Machines Cylinder Head
C4.4 Marine Generator Set Engines Camshaft - Remove and Install
C3.3 and C4.4 Generator Sets Camshaft Gear - Remove and Install
C4.4 Marine Generator Set Engines Camshaft Bearings - Remove and Install