Initial Startup Procedure
注: 本程序只应由 Caterpillar 认证的维修人员执行。 本程序应在锚固系统且正确连接所有线路后进行。
Show/hide table
| 注意 |
|---|
在系统初始起动之前必须先完成下列程序： 系统运作、测试和调整, RENR2476, "振动传感器归零 － 校准", 系统运作、测试和调整, RENR2476, "转子位置传感器 － 调整" 和 系统运作、测试和调整, RENR2476, "转子位置传感器 － 校准" |
- 将 UPS 的钥匙开关 (2) 转动到"旁通（Bypass）"位置。
Show/hide table
| 图 1 | g00989138 |
- 断开输出隔离开关 (7) 。
Show/hide table
| 图 2 | g00989110 |
- 断开输入隔离开关 (8) 。
- 断开旁通开关 (6) 。
Caterpillar Information System:
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Oil - Change
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Safety Signs and Labels
UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Fire Prevention and Explosion Prevention
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Remote Status Panel
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Electrical System
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Air Filter - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Hazard Information
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Device Bus Network
3508 EUI Engines General Information
3512B Petroleum Engine Air Shutoff - Test
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Related Options
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Acronyms
C27 Industrial Engine and C27 Locomotive Engine Reference Material
TH48-E80 Petroleum Transmission Magnetic Screen (Transmission) - Clean
C2.2 Engine and C1.5 Generator Set Electrical System
C6.6 Industrial Engine Starter Motor
C6.6 Industrial Engine Alternator
C7 and C9 On-highway Engines Safety Messages
2006/03/20 270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
G3400 Engines (EIS) Shutdown Relay
C7 and C9 On-highway Engines Engine Crankcase Breather - Clean
C4.4 Marine Generator Set Engines Cylinder Head - Remove
C27 and C32 Industrial Engines Model View Illustrations