C7.1 Engines for Caterpillar Built Machines Caterpillar


Cylinder Head

Usage:

525D 2L5



图 1g01345226

典型实例

用干净的发动机机油润滑螺纹和螺栓头的下部。

按图 1 中所示的顺序将螺栓上紧到以下扭矩。 ... 50 N·m (37 lb ft)
再次将螺栓拧紧至以下扭矩。 ... 100 N·m (74 lb ft)
将螺栓头拧紧到附加量。 ... 225 度

缸盖最小厚度 ... 94.80 mm (3.7323 in)




图 2g01345227

典型实例

注: 表 1 中给出了缸盖的最大变形。

表 1
尺寸     最大允许变形    
宽度 (A)    
0.03 mm (0.0012 in)    
长度 (B)    
0.05 mm (0.0020 in)    
对角线 (C)    
0.05 mm (0.020 in)    



图 3g01345230

典型实例

(C) 气门导管孔

进气和排气 ... 5.979 至 5.992 mm (0.2354 至 0.2359 in)

(D) 气门深度

进气 ... 0.905 至 1.163 mm (0.0356 至 0.0458 in)
进气门深度的维修极限 ... 1.41 mm (0.0555 in)
排气 ... 0.876 至 1.131 mm (0.0345 至 0.0445 in)
排气门深度的维修极限 ... 1.38 mm (0.0543 in)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.