Camshaft Bearings - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 8S-2241 | Camshaft Bearing Tool Group | 1 |
| 8H-0684 | Ratchet Wrench | 1 | |
Start By:
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) and remove camshaft bearings (1).
Show/hide table
| |
| Illustration 1 | g00546333 |
Show/hide table
| |
| Illustration 2 | g00546238 |
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 8S-2241 | Camshaft Bearing Tool Group | 1 |
| 8H-0684 | Ratchet Wrench | 1 | |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) in order to install camshaft bearings (1).
Note: Align the oil hole in camshaft bearing (1) with the oil hole in the cylinder block. The camshaft bearings should be installed to a depth that is flush with the face of the recess in the cylinder block.
Show/hide table
|
| |
| Illustration 3 | g00546238 |
Show/hide table
|
| |
| Illustration 4 | g00546333 |
End By:
- Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Caterpillar Information System:
C3.3 and C4.4 Generator Sets Camshaft Gear - Remove and Install
C4.4 Marine Generator Set Engines Camshaft - Remove and Install
C7.1 Engines for Caterpillar Built Machines Cylinder Head
3406E Marine Engine Flywheel - Install
3406E Marine Engine Flywheel - Remove
C27 and C32 Industrial Engines Model View Illustrations
C4.4 Marine Generator Set Engines Cylinder Head - Remove
C7 and C9 On-highway Engines Engine Crankcase Breather - Clean
G3400 Engines (EIS) Shutdown Relay
2006/03/20 270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
C7 and C9 On-highway Engines Safety Messages
C6.6 Industrial Engine Alternator
C7.1 Engines for Caterpillar Built Machines Cylinder Head Valves
Caterpillar On-Highway Diesel Engine Fluids Recommendations Aftermarket Oil Additives
C7 On-highway Engine Turbocharger Oil Lines
2005/05/23 New Ignition Harness {1408}
C13 and C15 On-highway Engines Coolant Temperature Is High
C7 On-highway Engine Air Compressor
3406E and C15 Marine Engines Cylinder Head - Remove
2005/05/09 New Flash Files are Available {7620}
3500 Engines with EUI Option Engine Design
3406E and C15 Marine Engines Cylinder Head - Install
3500 Engines with EUI Option Engine Design
3500 Engines with EUI Option Engine Design