Flywheel - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7573     | 提升支架     | 2     |
B     | -     | 导向螺柱 5/8 - 18 NF x 8 in     |
2     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将工具 (A) 和适当的起吊设备连接到飞轮 (2) 上。 飞轮 (2) 的重量约为 65 kg (143 lb)。
Show/hide table
图 1 | g01091639 |
- 拆下两个螺栓 (1) 。 安装工具 (B) 。
- 拆下剩余的螺栓 (1) 。 拆下飞轮 (2) 。
- 使用锤子和冲头以将齿圈 (3) 从飞轮 (2) 上拆下。
Show/hide table
图 2 | g01091705 |
Caterpillar Information System:
C27 and C32 Industrial Engines Model View Illustrations
C4.4 Marine Generator Set Engines Cylinder Head - Remove
C7 and C9 On-highway Engines Engine Crankcase Breather - Clean
G3400 Engines (EIS) Shutdown Relay
2006/03/20 270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
C7 and C9 On-highway Engines Safety Messages
C6.6 Industrial Engine Alternator
C6.6 Industrial Engine Starter Motor
C2.2 Engine and C1.5 Generator Set Electrical System
TH48-E80 Petroleum Transmission Magnetic Screen (Transmission) - Clean
C27 Industrial Engine and C27 Locomotive Engine Reference Material
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Acronyms
3406E Marine Engine Flywheel - Install
C7.1 Engines for Caterpillar Built Machines Cylinder Head
C4.4 Marine Generator Set Engines Camshaft - Remove and Install
C3.3 and C4.4 Generator Sets Camshaft Gear - Remove and Install
C4.4 Marine Generator Set Engines Camshaft Bearings - Remove and Install
C7.1 Engines for Caterpillar Built Machines Cylinder Head Valves
Caterpillar On-Highway Diesel Engine Fluids Recommendations Aftermarket Oil Additives
C7 On-highway Engine Turbocharger Oil Lines
2005/05/23 New Ignition Harness {1408}
C13 and C15 On-highway Engines Coolant Temperature Is High
C7 On-highway Engine Air Compressor
3406E and C15 Marine Engines Cylinder Head - Remove