Dimensions in Special Instruction are now Updated {3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100}
- Integrated Toolcarriers:
- IT12F (PIN: 1KF)
- Wheel Loaders:
- 902 (PIN: 7ES)
- IT14B (PIN: 3NJ)
- IT14F (PIN: 4EL)
- IT14G (PIN: 8ZM; 1WN)
- IT18B (PIN: 4ZD; 1DF; 2NJ)
- IT18F (PIN: 6ZF; 5EJ; 8GJ)
- IT24F (PIN: 4NN; 6KN)
- IT28B (PIN: 5SD; 1HF; 1JK)
- IT28F (PIN: 1JL; 3CL)
- IT28G (PIN: 8CR; 9AR)
- 906 (PIN: 6ZS)
- 908 (PIN: 8BS)
- 910E (PIN: 1SF; 1YK)
- 910F (PIN: 1SF; 1YK)
- 914G (PIN: 7ZM; 9WM)
- 916 (PIN: 2XB; 9WB; 5KC)
- 918F (PIN: 3TJ; 2CK; 5DL)
- 920 (PIN: 41J; 62K)
- 924F (PIN: 4YN; 5NN; 6MN; 7PN)
- 926E (PIN: 4NB; 8NB; 94Z)
- 928F (PIN: 8AK; 2XL; 7YM)
- 928G (PIN: 6XR; 7SR)
- 930 (PIN: 41K)
The Special Instruction, REHS0276, "Dimensions fo Articulated Hitches, Lift Arms, Front and Rear Levers, and Oscillating Rear Axle Assemblies," has been updated.
Several dimensions for critical pin bores on the hitches for the following machines have been expanded for greater accuracy: IT18F, IT24F, IT28F, 902, 906, 918F, 924F and 928F.
The updated Special Instruction, REHS0276 can be obtained through the normal literature ordering channels. The publication can also be found on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
988G Wheel Loader Machine Systems Steering Control Valve - Remove
D8R Series II Track-Type Tractor Power Train Power Train Hydraulic System
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 12 Electronic Control Module (Machine) Failed - Test
994D Wheel Loader Battery Hold-Down - Tighten
910G HYSTAT Wheel Loader Hydraulic System Oil Level - Check
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 09 Electronic Control Module (Machine) Abnormal Update - Test
2000/05/08 The Hydraulic Tank Relief Valve Has Been Repositioned in Order to Prevent Leaking {5056}
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 02 Electronic Control Module (Machine) Incorrect Signal - Test
D6M Track-Type Tractor Warranty Information
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Speed Sensor - Replace
973C Track-Type Loader Power Train Pump Drive - Disassemble
651E and 657E Wheel Tractor-Scrapers Hydraulic System Check Valve (Carry and Quick-Drop)
D8R Series II Track-Type Tractor Power Train Electronic Control System Components
2000/05/08 The Hydraulic Tank Relief Valve Has Been Repositioned in Order to Prevent Leaking {5056}
3618 Engine Main Bearings
525B Wheel Skidder and 535B Wheel Skidder Engine Supplement Steering Frame Lock - Separate and Connect
988G Wheel Loader Machine Systems Steering Control Valve - Install
988G Wheel Loader Machine Systems Steering Control Valve (with Secondary Steering) - Disassemble
2000/03/27 Maintenance and Repair to a Closed Loop System for the Engine Crankcase Breather {1107, 1317}
988G Wheel Loader Machine Systems Steering Control Valve (with Secondary Steering) - Assemble
3034 Engine for Caterpillar Built Machines Fuel Injection Lines
525B and 535B Wheel Skidders Power Train Bottom Guard (Engine) - Remove and Install
525B and 535B Wheel Skidders Power Train Bottom Guard (Transmission) - Remove and Install
D8R Series II Track-Type Tractor Power Train Power Train Oil Filter