Steering Control Valve - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7575     | 连杆支架     | 1     |
- 将工具 (A) 和适当的起吊设备安装到转向控制阀 (1) 上。 转向控制阀 (1) 的重量约为 52 kg (115 lb)。 安装转向控制阀 (1) 。
Show/hide table
图 1 | g00690993 |
- 将螺栓 (13) 安装到转向控制阀 (1) 上。
Show/hide table
图 2 | g00690994 |
- 安装管组件 (11) 和 (12) 。
Show/hide table
图 3 | g00690991 |
- 连接软管组件 (8) 和 (9) 并连接软管组件 (10) 。
Show/hide table
图 4 | g00690990 |
- 将软管组件 (7) 连接到转向控制阀 (1) 上。
Show/hide table
图 5 | g00690989 |
- 将软管组件 (6) 连接到转向控制阀上。
Show/hide table
图 6 | g00690987 |
- 将软管组件 (4) 、螺栓 (5) 和卡箍安装到转向控制阀上。
- 将软管组件 (2) 和 (3) 连接到转向控制阀 (1) 上。
Show/hide table
图 7 | g00690985 |
End By: 安装驾驶室。 请参考 拆解和组装, "驾驶室 - 安装"。
Caterpillar Information System:
525B Wheel Skidder and 535B Wheel Skidder Engine Supplement Steering Frame Lock - Separate and Connect
3618 Engine Main Bearings
2000/05/08 The Hydraulic Tank Relief Valve Has Been Repositioned in Order to Prevent Leaking {5056}
D8R Series II Track-Type Tractor Power Train Electronic Control System Components
2000/03/27 Dimensions in Special Instruction are now Updated {3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100}
988G Wheel Loader Machine Systems Steering Control Valve - Remove
D8R Series II Track-Type Tractor Power Train Power Train Hydraulic System
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 12 Electronic Control Module (Machine) Failed - Test
994D Wheel Loader Battery Hold-Down - Tighten
910G HYSTAT Wheel Loader Hydraulic System Oil Level - Check
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 09 Electronic Control Module (Machine) Abnormal Update - Test
2000/05/08 The Hydraulic Tank Relief Valve Has Been Repositioned in Order to Prevent Leaking {5056}
988G Wheel Loader Machine Systems Steering Control Valve (with Secondary Steering) - Disassemble
2000/03/27 Maintenance and Repair to a Closed Loop System for the Engine Crankcase Breather {1107, 1317}
988G Wheel Loader Machine Systems Steering Control Valve (with Secondary Steering) - Assemble
3034 Engine for Caterpillar Built Machines Fuel Injection Lines
525B and 535B Wheel Skidders Power Train Bottom Guard (Engine) - Remove and Install
525B and 535B Wheel Skidders Power Train Bottom Guard (Transmission) - Remove and Install
D8R Series II Track-Type Tractor Power Train Power Train Oil Filter
525B and 535B Wheel Skidders Power Train Bottom Guard (Rear Axle) - Remove and Install
988G Wheel Loader Electrohydraulic System System Schematic
525B and 535B Wheel Skidders Power Train Bottom Guard (Front Axle) - Remove and Install
988G Wheel Loader Machine Systems Operator Platform - Install
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System System Schematic