Tilt Cylinder (High Lift)
Show/hide table
 | |
| Illustration 1 | g03418497 |
Show/hide table
| Specification for 124-6227 Tilt Cylinder Gp and 124-6228 Tilt Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 1V-8242 Bushing | Bore is 89.185 ± 0.020 mm (3.5112 ± 0.0008 inch). |
| Installation depth is 10.2 ± 0.5 mm (0.40 ± 0.02 inch). |
|||
| 2 | 1 | 5J-3488 Locknut | Before assembly, lubricate the threads. |
| Torque to 5000 ± 500 N·m (3688 ± 369 lb ft). |
|||
| A | 1 | 112-5068 Cylinder As | Bore diameter is 158.80 ± 0.10 mm (6.252 ± 0.004 inch). |
| B | 1 | 378-4056 Rod As | Diameter is 76.150 ± 0.038 mm (2.9980 ± 0.0015 inch). |
| C | 1 | 124-6225 Head | Bore over four lands is 76.48 ± 0.03 mm (3.011 ± 0.001 inch). |
| 3 | 2 | 8T-0667 Bolt | Torque to 900 ± 100 N·m (664 ± 74 lb ft). |
| 4 | 1 | 8T-7584 Wear Ring | Inside diameter before assembly is 76.2 mm (3.00 inch). |
| Thickness is 1.50 ± 0.03 mm (0.059 ± 0.001 inch). |
|||
| 5 | 1 | 312-4248 Buffer Seal As | Lubricate lightly with lubricant that is being sealed. |
| 6 | 1 | 312-4245 U-Cup Seal | Lubricate lightly with lubricant that is being sealed. |
| 7 | 1 | 312-4247 Wiper Seal | Lubricate lightly with lubricant that is being sealed. |
| 8 | - | - | Before assembly, apply Loctite Retaining Compound 620 to the wiper seal groove. |
Caterpillar Information System:
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks MID 036 - CID 0267 - FMI 02 Incorrect Engine Shutdown Switch inputs
C9 Engine For Caterpillar Built Machines Cylinder Head - Install
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Electrical Connectors and Functions
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Cat Data Link
C9 Engine For Caterpillar Built Machines Cylinder Head - Remove
SR4 and SR4B Electric Power Generation Rewind Data General Information
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Digital Sensor Supply
D10R Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
C-9 Engines for Caterpillar Built Machines Aftercooler - Test
924G and 924GZ Wheel Loaders Steering System Steering Wheel Slip - Check
3054 and 3056 Industrial and Generator Set Engines Turbocharger
C9 Engines for Caterpillar Built Machines Crankshaft - Install
515 Wheel Skidder and 525 Wheel Skidder Hydraulic and Steering System Control Valve (Hydraulic Retrieval Device)
3056 Engine for Caterpillar Built Machines Vibration Damper and Pulley - Remove
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 0291 - FMI 05 Engine Cooling Fan Solenoid open circuit
924G and 924GZ Wheel Loaders Steering System Pump Flow - Test
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 0291 - FMI 06 Engine Cooling Fan Solenoid short to ground
3524B Engines for Off-Highway Trucks MID 036 - CID 0296 - FMI 09 Unable to communicate with Transmission ECM
C9 Engine For Caterpillar Built Machines Lifter Group - Remove and Install
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Truck Counter
D9R Track-Type Tractor Equalizer Bar End Pins - Measure
924G and 924GZ Wheel Loaders Steering System Hydraulic Oil Contamination - Test
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 0526 - FMI 05 Turbo Wastegate Drive current low
924G and 924Gz Wheel Loaders Power Train Solenoid Valve (Transmission Clutch) - Test