Bulldozer Lift Cylinder - Install
Installation Procedure
Show/hide table
Tools Needed     | B     |
138-7575 Link Bracket     | 2     |
- Fasten a hoist and Tooling (B) to lift cylinder (3). Tooling (B) is not shown.
Show/hide table
Illustration 1 | g00535503 |
- Position lift cylinder (3) on the mounting yoke. The weight of the lift cylinder is approximately 250 kg (550 lb).
- Install bearing caps (10) and install bolts (9) on each side of the lift cylinder.
- Connect wiring harness (7) on position sensor (8) .
Show/hide table
Illustration 2 | g00535501 |
- Install hydraulic hose assemblies (6) on lift cylinder (3) .
Show/hide table
Illustration 3 | g00535499 |
- Remove Tooling (B) .
- Install lamp assembly (4) and guard assembly (5) on top of the lift cylinder.
Show/hide table
Illustration 4 | g00556371 |
- Remove the rope from the cylinder rod on lift cylinder (3) .
Show/hide table
Illustration 5 | g00535495 |
- Extend the cylinder rod. Install pin (1) and retainer (2) .
Show/hide table
Illustration 6 | g00535494 |
- Install both cylinder rods. Remove Tooling (A) from each lift cylinder bracket.
Note: Refer to the Operation and Maintenance Manual for all fluid capacities and proper filling procedures.
Caterpillar Information System:
D11R Carrydozer Track-Type Tractor Bulldozer Lift Cylinder - Remove
D11R Carrydozer Track-Type Tractor Dual Tilt Control Valve - Install
D11R Carrydozer Track-Type Tractor Dual Tilt Control Valve - Remove
D11R Track-Type Tractor Machine Systems Dual Tilt Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Dual Tilt Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Dual Tilt Control Valve - Install
D11R Track-Type Tractor Machine Systems Dual Tilt Control Valve - Remove
988G Wheel Loader Steering System Steering Neutralizer Valve
988G Wheel Loader Bucket Rated Load
988G Wheel Loader Braking System Parking Brake Control Cable - Adjust
988G Wheel Loader Braking System Parking Brake - Test
322B, 322B L, 325B and 325B L Excavators Travel Control - Straight Travel Pedal (If Equipped)
D11R Carrydozer Track-Type Tractor Bulldozer Tilt Cylinder - Remove
D11R Carrydozer Track-Type Tractor Bulldozer Tilt Cylinder - Install
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Remove
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Install
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
545 Wheel Skidder Power Train Machine Preparation for Troubleshooting
D8R Track-Type Tractor Power Train Fender
D8R Series II Track-Type Tractor Power Train Drawbar
545 Wheel Skidder Power Train Visual Inspection
545 Wheel Skidder Power Train Power Train Troubleshooting