Gear Group (Rear) - Remove
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-0520 | 冲头总成 | 1 |
开始:
- 拆下飞轮壳体。
- 拆卸曲轴后密封件和耐磨衬套。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 拆下螺栓 (1) 和止推盘 (2)。 拆卸惰轮组件 (3)。
Show/hide table
图 2 g06321115 - 使用工具 (A) 和合适的压具从惰轮齿轮组 (3) 上拆下套筒轴承 (4)。
Show/hide table
图 3 g06321120 - 卸下螺栓 (5)。
- 拆下惰轮轴 (6) 与凸轮轴惰轮 (7)。
Show/hide table
图 4 g06321154 - 从齿轮 (7) 上拆下止推垫圈 (8)。
Show/hide table
图 5 g06321151 - 使用工具 (A) 和合适的压具从凸轮轴惰轮 (7) 上拆下套筒轴承 (9)。
Show/hide table
图 6 g06321167 - 拆下螺栓 (11)。 拆下齿轮组轴 (10)。
Show/hide table
图 7 g06321170 - 拆下螺栓 (12)。 拆下曲轴齿轮 (13)。
Show/hide table
| |
| 图 1 | g06320914 |
Caterpillar Information System:
325D and 329D Excavators and 325D Material Handler Machine System Specifications Heater and Air Conditioner Mounting
3412E Petroleum Engine Flywheel - Inspect
C9 Engine for Caterpillar Built Machines CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
3500 Engines Turbocharger - Assemble - Type 1
3500 Engines Turbocharger - Disassemble - Type 1
3412E Petroleum Engine Engine Valve Lash - Inspect/Adjust
3412E Petroleum Engine Inlet Manifold Pressure - Test
3500 Engines Turbocharger - Disassemble - Type 2
3500 Engines Turbocharger - Assemble - Type 2
C-10 Petroleum Engine General Information
3412E Petroleum Engine Electronic Unit Injector - Adjust
3412E Petroleum Engine Vibration Damper - Check
C-10 Petroleum Engine Engine Valve Lash - Inspect/Adjust
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Install
C32 Marine and Marine Generator Set Engines General Information
C32 Marine Engines Electronic Control System Components
320D and 323D Excavators Machine System Specifications Hydraulic Pedal Control (Straight Travel)
Unpacking Instructions for UPS 1000S and 1200S{4480} Unpacking Instructions for UPS 1000S and 1200S{4480}
C9 Marine Generator Set Model View Illustrations
3500 Engines Electronic Control Module (Engine) - Remove and Install
3412E, C30 and C32 Marine Engines Coolant Level Sensor - Remove and Install
Installation of the 262-5465 Check Valve Kit or the 266-4455 Check Valve Kit {1714} Installation of the 262-5465 Check Valve Kit or the 266-4455 Check Valve Kit {1714}
3412E, C30 and C32 Marine Engines Injection Actuation Pressure Sensor - Remove and Install