325D and 329D Excavators and 325D Material Handler Machine System Specifications Caterpillar


Heater and Air Conditioner Mounting

Usage:

325D L A3R



图 1g01518373

左前视图

(1) 7 只螺栓的扭矩 ... 22.0 ± 2.4 N·m (16 ± 2 lb ft)




图 2g01518393

前仰视图

(2) 3 只螺栓的扭矩 ... 29.5 ± 4.5 N·m (22 ± 3 lb ft)

Caterpillar Information System:

3412E Petroleum Engine Flywheel - Inspect
C9 Engine for Caterpillar Built Machines CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
3500 Engines Turbocharger - Assemble - Type 1
3500 Engines Turbocharger - Disassemble - Type 1
3412E Petroleum Engine Engine Valve Lash - Inspect/Adjust
3412E Petroleum Engine Inlet Manifold Pressure - Test
3500 Engines Turbocharger - Disassemble - Type 2
3500 Engines Turbocharger - Assemble - Type 2
C-10 Petroleum Engine General Information
3412E Petroleum Engine Electronic Unit Injector - Adjust
3412E Petroleum Engine Electronic Unit Injector - Test
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Remove
3412E Petroleum Engine Vibration Damper - Check
C-10 Petroleum Engine Engine Valve Lash - Inspect/Adjust
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Install
C32 Marine and Marine Generator Set Engines General Information
C32 Marine Engines Electronic Control System Components
320D and 323D Excavators Machine System Specifications Hydraulic Pedal Control (Straight Travel)
Unpacking Instructions for UPS 1000S and 1200S{4480} Unpacking Instructions for UPS 1000S and 1200S{4480}
C9 Marine Generator Set Model View Illustrations
3500 Engines Electronic Control Module (Engine) - Remove and Install
3412E, C30 and C32 Marine Engines Coolant Level Sensor - Remove and Install
Installation of the 262-5465 Check Valve Kit or the 266-4455 Check Valve Kit {1714} Installation of the 262-5465 Check Valve Kit or the 266-4455 Check Valve Kit {1714}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.