Coolant Level Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Note: Drain the coolant level until the coolant is below the sensor.
Show/hide table
| |
| Illustration 1 | g01118606 |
(1) Coolant level sensor ...
Caterpillar Information System:
3500 Engines Electronic Control Module (Engine) - Remove and Install
C9 Marine Generator Set Model View Illustrations
Unpacking Instructions for UPS 1000S and 1200S{4480} Unpacking Instructions for UPS 1000S and 1200S{4480}
320D and 323D Excavators Machine System Specifications Hydraulic Pedal Control (Straight Travel)
C32 Marine Engines Electronic Control System Components
C32 Marine and Marine Generator Set Engines General Information
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Install
C-10 Petroleum Engine Engine Valve Lash - Inspect/Adjust
3412E Petroleum Engine Vibration Damper - Check
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Heater and Air Conditioner Mounting
3412E Petroleum Engine Flywheel - Inspect
Installation of the 262-5465 Check Valve Kit or the 266-4455 Check Valve Kit {1714} Installation of the 262-5465 Check Valve Kit or the 266-4455 Check Valve Kit {1714}
3412E, C30 and C32 Marine Engines Injection Actuation Pressure Sensor - Remove and Install
3412E, C30 and C32 Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C11 and C13 On-Highway Engines Turbocharger
3412E, C30 and C32 Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C11 and C13 On-Highway Engines Turbocharger
C11 and C13 Engines for Caterpillar Built Machines System Configuration Parameters
C7 and C9 On-Highway Engines 0094-03 Fuel Pressure voltage high (37)
3412E, C30 and C32 Marine Engines Inlet Air Temperature Sensor - Remove and Install
C-10 Petroleum Engine Fuel System
C7 and C9 On-Highway Engines 0094-04 Fuel Pressure voltage low (37)
3412E, C30 and C32 Marine Engines Inlet Air Temperature Sensor - Remove and Install