Crankshaft Rear Seal - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1U-7600 | 滑锤拉拔器 | 1 |
开始:
- 拆卸飞轮。 请参阅拆解和组装, "飞轮 - 拆卸"。
注: 某些配置可能不需要曲轴后密封。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 或者冲头和锤子在承磨衬套 (2) 上冲出不少于三个的孔。
Show/hide table
 | |
| 图 1 | g01007851 |
- 使用工具 (A) 拆卸承磨衬套。
- 用工具 (A) 或者冲头和锤子在曲轴后密封 (1) 上冲出不少于三个的孔。
- 使用工具 (A) 拆卸曲轴后油封。
Caterpillar Information System:
3500 Engines Turbocharger - Assemble - Type 1
3500 Engines Turbocharger - Disassemble - Type 1
3412E Petroleum Engine Engine Valve Lash - Inspect/Adjust
3412E Petroleum Engine Inlet Manifold Pressure - Test
3500 Engines Turbocharger - Disassemble - Type 2
3500 Engines Turbocharger - Assemble - Type 2
C-10 Petroleum Engine General Information
3412E Petroleum Engine Electronic Unit Injector - Adjust
3412E Petroleum Engine Electronic Unit Injector - Test
3126B Petroleum Engine Can Not Reach Top Engine RPM
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM) - Replace
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM) - Configure
C9 Engine for Caterpillar Built Machines CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3412E Petroleum Engine Flywheel - Inspect
325D and 329D Excavators and 325D Material Handler Machine System Specifications Heater and Air Conditioner Mounting
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Remove
3412E Petroleum Engine Vibration Damper - Check
C-10 Petroleum Engine Engine Valve Lash - Inspect/Adjust
3508C, 3512C and 3516C Marine Engines Gear Group (Rear) - Install
C32 Marine and Marine Generator Set Engines General Information
C32 Marine Engines Electronic Control System Components
320D and 323D Excavators Machine System Specifications Hydraulic Pedal Control (Straight Travel)
Unpacking Instructions for UPS 1000S and 1200S{4480} Unpacking Instructions for UPS 1000S and 1200S{4480}
C9 Marine Generator Set Model View Illustrations