Camshaft Bearing Position
Show/hide table
 | |
| Illustration 1 | g01412551 |
The camshaft bearings from the front surface of the cylinder block are the following dimensions:
(A) ... 803.10 ± 0.50 mm (31.618 ± 0.020 inch)
(B) ... 593.90 ± 0.50 mm (23.382 ± 0.020 inch)
(C) ... 409.70 ± 0.50 mm (16.130 ± 0.020 inch)
(D) ... 225.60 ± 0.50 mm (8.882 ± 0.020 inch)
(E) ... 4.60 ± 0.50 mm (0.180 ± 0.020 inch)
Caterpillar Information System:
345C MHPU Mobile Hydraulic Power Unit Engine Crankcase Breather - Clean
Quick Coupler (Dedicated Wedge Lock) Quick Coupler - Clean/Inspect
C13, C15, and C18 Generator Set Engines Cooling System
349F and 352F Excavators Engine Oil Sample - Obtain
3500 Industrial and Generator Set Engines Product Lifting
G3408 and G3412 Engines Camshaft Bearing Position
UPS 250 and UPS 300 Uninterruptible Power Supplies System Description
G3408 and G3412 Engines Governor Control
C15 On-highway Engine Compression Brake - If Equipped
G3606 and G3608 Engines Refill Capacities and Recommendations
G3500B Engines Air/Fuel Ratio Control - Adjust - Oxygen Feedback - Generator Set Application
3456 Generator Sets Refill Capacities and Recommendations
G3406 Engines Camshaft Bearing Position
C15 On-highway Engines Sensors and Electrical Connectors
2004/08/16 Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
C15 On-highway Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
G3408 and G3412 Engines Cylinder Head
C13 and C15 Engines for Combat and Tactical Vehicles Engine Coolant Diverter Circuit - Test
G3606 and G3608 Engines Cooling System Coolant (NGEC) - Change
C15 On-highway Engines Engine Pressure Sensor Open or Short Circuit - Test
G3612 and G3616 Engines Engine Air Cleaner Element (Single Element) - Clean/Replace
C11 and C13 On-Highway Engines Gear Group (Rear)
C13 Engine for Combat and Tactical Vehicles Basic Engine
C11 and C13 Engines Muffler