G3408 and G3412 Engines Caterpillar


Camshaft Bearing Position

Usage:

G3412 3NK


Illustration 1g02720491

Table 1
Specification for 4N-0685 Bushing and 4N-6658 Bushing 
Item  Qty  Part  Specification Description 
The camshaft bearings from the rear surface of the cylinder block are the following dimensions: 
Distance is 1144.30 ± 0.50 mm (45.051 ± 0.020 inch)
Distance is 947.90 ± 0.50 mm (37.319 ± 0.020 inch)
Distance is 763.80 ± 0.50 mm (30.071 ± 0.020 inch)
Distance is 579.60 ± 0.50 mm (22.819 ± 0.020 inch)
Distance is 395.50 ± 0.50 mm (15.571 ± 0.020 inch)
Distance is 211.30 ± 0.50 mm (8.319 ± 0.020 inch)
Distance is 7.40 ± 0.50 mm (0.291 ± 0.020 inch)

Caterpillar Information System:

UPS 250 and UPS 300 Uninterruptible Power Supplies System Description
G3408 and G3412 Engines Governor Control
C15 On-highway Engine Compression Brake - If Equipped
G3606 and G3608 Engines Refill Capacities and Recommendations
G3500B Engines Air/Fuel Ratio Control - Adjust - Oxygen Feedback - Generator Set Application
3456 Generator Sets Refill Capacities and Recommendations
C15 Petroleum Generator Set Engines Cooling System - Inspect
C15 Petroleum Generator Set Engines Aftercooler - Test
G3500B Engines Exhaust Bypass Valve - Adjust
Installation Guide for Product Link PL121SR and PL321{7606} Installation Guide for Product Link PL121SR and PL321{7606}
2004/08/01 New Gasket for the Turbocharger Oil Line {1052, 1307}
345C MHPU Mobile Hydraulic Power Unit Engine Oil Level - Check
3500 Industrial and Generator Set Engines Product Lifting
349F and 352F Excavators Engine Oil Sample - Obtain
C13, C15, and C18 Generator Set Engines Cooling System
Quick Coupler (Dedicated Wedge Lock) Quick Coupler - Clean/Inspect
345C MHPU Mobile Hydraulic Power Unit Engine Crankcase Breather - Clean
G3408 and G3412 Engines Camshaft Bearing Position
G3406 Engines Camshaft Bearing Position
C15 On-highway Engines Sensors and Electrical Connectors
2004/08/16 Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
C15 On-highway Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
G3408 and G3412 Engines Cylinder Head
C13 and C15 Engines for Combat and Tactical Vehicles Engine Coolant Diverter Circuit - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.