621F, 623F and 627F Wheel Tractor-Scrapers Air System and Brakes Caterpillar


Differential Lock Control

Usage:

627F 1DL



Illustration 1g00411478

(1) Differential lock control switch


NOTICE

Do not engage the differential lock with one wheel spinning.

Reduce engine rpm, until the wheel stops spinning, before depressing the differential lock pedal.





Illustration 2g00411919

(2) Differential lock solenoid valve

------ WARNING! ------

Personal injury or death can result from limited steering control.

Engaging the differential lock when the machine is moving can limit steering control.

Do not engage differential lock when machine is moving at high speed because steering control will be limited.

----------------------

The differential lock is electric over air. The electric switch (1) is located near the base of the steering column. The air solenoid valve is located on the rear of the differential.

The air pressure will force piston (5) to the right. This will move jaw (4) against jaw (6) . When the pedal is released, the supply passage is closed. This allows air that is between the air solenoid valve and the quick release valve to flow through the exhaust passage. Air pressure inside the cylinder will exit through the quick release valve.




Illustration 3g00412178

Differential

(3) Differential lock cylinder

(4) Jaw

(5) Piston

(6) Jaw

Caterpillar Information System:

992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter Lockup Clutch Pressure - Test
G3300 Engines Alternator - Inspect
637E Series II Wheel Tractor-Scrapers Engine Oil and Filter - Change
966G Wheel Loader and 972G Wheel Loader Machine Systems Steering Control Valve - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Steering Control Valve - Remove
627F Wheel Tractor-Scraper Engine Oil Level - Check
854G Wheel Dozer Machine Systems Steering Frame Lock - Separate and Connect
3508B Engine for Caterpillar Built Machines Fuel Filter Differential Pressure Switch
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Design
615C Series II Wheel Tractor-Scraper Engine Supplement Engine - Install
631E Series II Wheel Tractor-Scrapers Differential and Final Drive Breather - Clean
613C Series II Wheel Tractor Power Train Transmission Oil Filter Base - Remove and Install
992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter Impeller Clutch Pressure - Test
992G Wheel Loader and 854G Wheel Dozer Power Train Reduced Rimpull Pressure - Test
994D Wheel Loader Power Train Filter Bypass Switch (Power Train)
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Pressures - Test and Adjust
D6R Track-Type Tractor Power Train Transmission Mounting
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Software Part Number Display - Submode 13
623F Wheel Tractor-Scraper Hydraulic System Bowl Circuit
633E Series II Wheel Tractor-Scraper Hydraulic System Check Valve (Carry)
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Pressure Switch (Pilot) for the Hydraulic System - Check - Submode 25
992G Wheel Loader and 854G Wheel Dozer Power Train Solenoid Valve (Transmission Clutch) - Test
992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter Pump Drive - Adjust
D6R Track-Type Tractor Power Train Torque Divider
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.