High Dump Bucket Operation
Show/hide table
 | |
| Illustration 1 | g00370052 |
- Position the loader in order to dump the load in the center of the hauling unit body. If the length of the hauling unit body is two times the length of the bucket, load the material into the hauling unit body from the front to the rear.
- Push the multipurpose lever forward in order to dump the load from the bucket.
Show/hide table
 | |
| Illustration 2 | g00370036 |
- Shake the bucket in order to loosen sticky material. Move the multipurpose lever back and forth in quick motions.
Show/hide table
| NOTICE |
|---|
To avoid damage to the boom, do not actuate the dump function on the single lever control while the bucket is extended. |
- Move the multipurpose lever to the TILT BACK position.
- Before you lower the bucket, make sure that the hauling unit is not under the bucket.
- Lower the bucket while you position the loader for the next load.
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod and Main Bearing Journals
966G Wheel Loader and 972G Wheel Loader Engine Supplement Radiator Core - Remove and Install
623F Wheel Tractor-Scraper Hydraulic System Main Control Valve
953C Track-Type Loader Power Train Drive Group (Flexible Coupling)
854G Wheel Tractor and 992G Wheel Loader Power Train Final Drive, Brake and Wheel - Remove and Install
623F Wheel Tractor-Scraper Hydraulic System Vane Pump (Hydraulic, Steering)
3406C Engines for Caterpillar Built Machines Cylinder Liner Projection
3034 Engine for Caterpillar Built Machines Water Pump
854G Wheel Tractor and 992G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Assemble
854G Wheel Tractor and 992G Wheel Loader Power Train Final Drive and Wheel to Service Brake - Connect
854G Wheel Tractor and 992G Wheel Loader Power Train Final Drive and Wheel from Service Brake - Separate
902 and 906 Compact Wheel Loaders Side Dump Bucket Operation
623F Wheel Tractor-Scraper Hydraulic System Relief Valve (Main)
D6G Track-Type Tractor Power Train Final Drive - Remove
3034 Engine for Caterpillar Built Machines Inlet Manifold
854G Wheel Tractor and 992G Wheel Loader Power Train Torque Converter Priority Valve - Remove
3034 Engine for Caterpillar Built Machines Exhaust Manifold
D11R Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove
854G Wheel Tractor and 992G Wheel Loader Power Train Service Brake - Disassemble
854G Wheel Tractor and 992G Wheel Loader Power Train Service Brake - Assemble
615C Series II Wheel Tractor-Scraper Engine Supplement Engine - Remove
994D Wheel Loader Steering System Bypass Switch (Steering Pump Case Drain)
3034 Engine for Caterpillar Built Machines Fuel Injection Pump