Illustration 1 | g00344578 |
145-0772 Cover end |
Rotation is counterclockwise when you look from the drive end.
This is a fixed displacement piston pump.
Use SAE 10W oil at 65 deg c (149 deg f) in order to test the pump.
Pump
- Output ... 48 L/min (12.5 US gpm)
- Pressure ... 6900 kPa (1000 psi)
- Speed ... 2200 rpm
- Pressure ... 6900 kPa (1000 psi)
(1) Torque for four bolts ... 100 ± 20 N·m (75 ± 15 lb ft)
(2) Torque for plug ... 105 ± 10 N·m (77 ± 7 lb ft)
(3) Torque for two plugs ... 45 ± 5 N·m (33 ± 3.5 lb ft)
(4) 138-4696 Spring
(5) 128-7073 Spring
Illustration 2 | g00344904 |
145-4878 Drive end |
Rotation is counterclockwise when you look from the drive end.
This is a variable piston pump.
Use SAE 10W oil at 65 deg c (149 deg f).
Pump
- Output ... 156 L/min (41 US gpm)
- Pressure ... 6900 kPa (1000 psi)
- Speed ... 2200 rpm
- Pressure cutoff at zero flow ... 14100 ± 350 kPa (2045 ± 51 psi)
- Margin pressure at 2200 rpm, 75 L/min (20 US gpm) and 13600 kPa (19745 psi) discharge pressure ... 2100 ± 100 kPa (305 ± 15 psi)
- Standby pressure ... 3150 Maximum
- Standby pressure ... 457 Maximum
- Pressure ... 6900 kPa (1000 psi)
(6) Torque for four bolts ... 165 ± 30 N·m (120 ± 20 lb ft)
(7) Torque for plug ... 105 ± 10 N·m (77 ± 7 lb ft)
(8) Torque for two plugs ... 45 ± 5 N·m (33 ± 3.5 lb ft)
(9) 6E-6176 Spring
(10) 6E-4009 Spring
Shaft Bearing Preload Adjustment
- Perform this procedure when you install a new swashplate or bearings.
- Assemble the pump swashplate, the shaft, the bearing and the shim.
- Install the cover and tighten four head bolts.27 ± 3 N·m (20 ± 2 lb ft)
- The clearance must be 0.0 to 0.05 mm (0.0 to .002 inch).
- If necessary, change the shim in order to achieve the proper initial clearance. Reassemble the head bolts and torque the head bolts. 165 ± 30 N·m (120 ± 20 lb ft)
Compensator Valve
Illustration 3 | g01374936 |
(11) 6E-3274 Spring
- Length under test force ... 14.4 mm (.57 inch)
- Test force ... 81.7 ± 14.5 N (18.4 ± 3.3 lb)
- Free length after test ... 15.9 mm (.63 inch)
- Outside diameter ... 7.7 mm (.30 inch)
- Test force ... 81.7 ± 14.5 N (18.4 ± 3.3 lb)
(12) 6E-3275 Spring
- Length under test force ... 15.1 mm (.59 inch)
- Test force ... 40.2 ± 2.8 N (9.0 ± .6 lb)
- Free length after test ... 20.5 mm (.81 inch)
- Outside diameter ... 10.7 mm (.42 inch)
- Test force ... 40.2 ± 2.8 N (9.0 ± .6 lb)
(13) 6E-3276 Spring
- Length under test force ... 32.6 mm (1.28 inch)
- Test force ... 462 ± 71 N (104 ± 16 lb)
- Free length after test ... 35.6 mm (1.40 inch)
- Outside diameter ... 19.2 mm (.76 inch)
- Test force ... 462 ± 71 N (104 ± 16 lb)