D6G Track-Type Tractor Power Train Caterpillar

Removal Procedure (Power Shift)

1. Remove the floorplate from the machine.

Note: The rod assemblies for the brake and the control rods for the steering clutch are removed in order to illustrate the universal joint.

Show/hide table



Illustration 1	g00418970

2. Remove eight bolts (1) and universal joint (2) .

Installation Procedure (Power Shift)

Show/hide table



Illustration 2	g00418970

1. Put universal joint (2) in position between the torque divider and the transmission.

2. Install eight bolts (1) and tighten to a torque of 55 ± 5 N·m (41 ± 4 lb ft).

3. Install the floorplate.