Limit Switch (Stop Light)
Show/hide table
 | |
| Illustration 1 | g00100342 |
Actuation force ... 1.11 N (.250 lb)
The contacts are normally closed.
(A) Maximum distance of pretravel ... 1.19 mm (.047 inch)
(B) Operating position of the limit switch ... 14.68 ± 0.38 mm (.578 ± .015 inch)
Note: This switch assembly has been correctly adjusted at assembly. The limit switch will activate the stop lamps if the pedal is moved by 2 ± 1 degrees. If an adjustment is required, loosen the two screws that secure the switch assembly in place. Rotate the switch assembly slightly and tighten the two screws.
Caterpillar Information System:
992G Wheel Loader and 854G Wheel Dozer Braking System Brake Control Valve (Parking)
992G Wheel Loader and 854G Wheel Dozer Braking System Parking Brake
D6M Track-Type Tractor Bulldozer Blade Lift Control
992G Wheel Loader and 854G Wheel Dozer Braking System Service Brakes
992G Wheel Loader Capacities (Refill)
561M Pipelayer Torque Converter and Pump Drive Housing
D5M Track-Type Tractor Transmission Control
992G Wheel Loader and 854G Wheel Dozer Braking System Limit Switch (Parking Brake)
D6R Track-Type Tractor Finger Tip Control (FTC)
561M Pipelayer Torque Converter
D5M Track-Type Tractor Governor and Decelerator
D6R Track-Type Tractor Service Brake Control
D6M Track-Type Tractor Starting Above 0°C (32°F)
D5M Track-Type Tractor Power Train Transmission and Torque Converter Pump
561M Pipelayer Engine Starting with Jump Start Cables
D6M Track-Type Tractor Starting Below 0°C (32°F)
D5M Track-Type Tractor After Starting Engine
D5M Track-Type Tractor Changing Direction and Speed
D6R Track-Type Tractor Normal Steering
631E Series II Wheel Tractor-Scrapers Crushing Prevention and Cutting Prevention
D6R Track-Type Tractor Steering on a Steep Downgrade
631E Series II Wheel Tractor-Scrapers Sound Information and Vibration Information
D6R Track-Type Tractor Stopping the Machine
D6M Track-Type Tractor Lifting and Tying Down the Machine