Usage:
D11N (74Z, 4HK),
D11R (8ZR, 9TR, 9XR) Track-Type Tractors;
992G (7HR),
854G (1JW) Wheel Loaders
Description of Change: New hardened shims replace the former shim on the lift and tilt relief valve in the Implement Control Valve. Excessive wear and distress of the former mild steel shims could cause pressure setting change and the need to re-adjust the pressure setting. The hardened shims resist wear that can cause loss of system pressure.
The new 152-5559 Shim, 152-5625 Shim, and 152-7041 Shim replace the former 4W-5723 Filter Retainer, 3J-7473 Shim, and 3H-2549 Shim in the 9T-8776, 124-6990, and 127-1604 Control Valves.
Refer to the following table and illustrations for usage of the new shims.
Typical of 9T-8776, 124-6990, and 127-1604
Shim Location.
(1) The 9T-5734 Spacer must be installed contacting the spring.