Installation Environment
This engine is for use as a component in ATEX Directive (94/9/EC) Group II, 3G environments with Gas Group IIB, Temperature Class T3 (200 Deg. C maximum surface temperature). This environmental classification is described as an area that is not likely to experience an explosive atmosphere. Gases, which could make the atmosphere explosive, are confined in a closed system. The gas can escape with unexpected conditions and abnormal conditions only. This can create an atmosphere that is explosive. The potential hazards that are associated with this engine and used in these environments are noted in this Operation and Maintenance Manual. The Installation Guide, LEGW3354 for Petroleum ATEX Engines as a component, and the following publications for this engine should also be read and understood.
- Specifications Manual, SENR9957
- Systems Operation/Testing and Adjusting, SENR9958
- Troubleshooting Guide, RENR5062
- Disassembly and Assembly, RENR8627
Caterpillar Information System:
2004/03/01 Correct Installation of the Oil Drain Lines for the Center Mounted Turbochargers {1052, 1307}
2005/06/20 A Parts Kit for the Piston Cooling Jets and Retainers for the Piston Cooling Jets is Now Cancelled {1331}
3508B, 3512B, and 3516B High Displacement Generator Sets Safety Messages
C13, C15, and C18 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Marine Engine Inlet Manifold Pressure - Test
G3520E Generator Set Engines Camshaft
3412E Petroleum Engine Electrical System
2004/04/01 The Procedure for the Installation of the Electronic Unit Injector Has Changed {1290}
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201} Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
C7 Marine Engine Cooling System - Test
2004/02/01 Updated ECM Software is Now Available for the Input Switch on the Air Conditioner Controls {7620}
2009/08/24 Calibration for the Engine Oil Level Gauge {1326}
3412E Petroleum Engine Safety Messages
3412E Petroleum Engine Engine Description
3412E Petroleum Engine Plate Locations and Film Locations
C11 and C13 Petroleum Engines Product Lifting
3412E Petroleum Engine Diagnostic Flash Code Retrieval
3412E Petroleum Engine Refill Capacities and Recommendations
C32 Power Module Cooling System Coolant (DEAC) - Change
2004/04/01 The Procedure for the Removal of the Electronic Unit Injector has Changed {1290}
C11 and C13 Petroleum Engines Cooling System Coolant (ELC) - Change
C-10 Petroleum Engine Electrical System
3500B and 3500C Marine Engines Electronic Control Module (ECM)
3412E Petroleum Engine Reference Material