2003/11/01 Caterpillar


Troubleshooting Guide for Marine Engine Cooling Systems is Now Available {1350}

Usage:

3208 01Z
Marine Engine:
3014 (S/N: 4GF1-UP)
3034 (S/N: CPP1-UP)
3054 (S/N: CSH1-UP; CYK1-UP)
3056 (S/N: CKS1-UP)
  • 3116
  • 3126
  • 3126B
  • 3208
  • 3304
  • 3306
  • 3406
  • 3408
  • 3412
  • C-9
    C-12 (S/N: 9HP1-UP)
    C18 (S/N: CKH1-UP)
    C30 (S/N: CLX1-UP)
  • A troubleshooting guide for cooling systems on marine engines is now available. Refer to Special Instruction, REHS1754-00, "Troubleshooting Marine Engine Cooling Systems".

    Caterpillar Information System:

    3456 Generator Sets Cooling System Coolant Sample (Level 1) - Obtain
    3456 Generator Sets Safety Messages
    C3.3 Industrial Engine Piston Cooling Jets - Remove and Install
    UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Flywheel Telemetry - Calibrate - Flywheels with EVD Bearings
    C9 Marine Engines and C9 Marine Generator Sets Crankshaft - Install
    C9 Marine Engines and C9 Marine Generator Sets Crankshaft Main Bearings - Install
    C9 Marine Engines and C9 Marine Generator Sets Crankshaft Main Bearings - Remove
    C9 Marine Engines and C9 Marine Generator Sets Crankshaft - Remove
    784C, 785C and 785C HAA Off-Highway Truck/Tractor Suspension Cylinder Pressure Sensor (Rear Suspension Cylinder)
    3408C, 3412C and 3412D High Performance Marine Engines Piston and Rings
    2003/10/01 New Fuel Check Valve {1262}
    C9 Marine Engines and C9 Marine Generator Sets Inlet and Exhaust Valve Guides - Remove and Install
    3456 Generator Sets Cooling System Coolant Sample (Level 2) - Obtain
    2003/11/01 Antifreeze is Added to the Corrosion Inhibitor {1395}
    2003/11/01 Introduction of New Pistons and Remanufactured Cylinder Packs {1214, 1239}
    3126B Industrial Engine Water Pump - Remove
    2003/11/01 A New Seal and Oil Pan Provides Improved Sealing {1302, 1302}
    3456 Generator Sets Maintenance Interval Schedule - Standby Generator Sets
    3456 Generator Sets Maintenance Interval Schedule - Prime Power Generator Sets
    2003/10/01 New Seals for the Front Housing {1151, 1207}
    C3.3 Industrial Engine Bearing Clearance - Check
    2003/10/01 Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
    C9 Marine Engines and C9 Marine Generator Sets Crankshaft Gear - Remove and Install
    2003/10/20 An Improved Turbocharger is Used {1052}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.