Cylinder Liner - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 5P-8665(1) | Cylinder Liner Puller Gp | 1 |
Show/hide table
(1) | The 173-5527 Cylinder Pack Puller is an optional Tool for removing the cylinder liner. |
Start By:
- Remove the pistons and connecting rods. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Protect the crankshaft journals from dirt or water.
Show/hide table
Illustration 1 g01143846 - Use Tooling (A) to remove cylinder liners (1).
- Remove liner seal (2) from cylinder liner (1).
Caterpillar Information System:
2003/11/01 New Expansion Tank Assembly {1354}
C3.3 Industrial Engine Camshaft - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Connecting Rod Bearings - Install
C9 Marine Engines and C9 Marine Generator Sets Connecting Rod Bearings - Remove
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Safety Messages
2003/10/01 Proper Termination Techniques May Increase VR3 Voltage Regulator Reliability {1410}
C11 and C13 Petroleum Engines Speed/Timing Sensor
C9 Marine Engines and C9 Marine Generator Sets Pistons and Connecting Rods - Assemble
C9 Marine Engines and C9 Marine Generator Sets Pistons and Connecting Rods - Disassemble
C9 Marine Engines and C9 Marine Generator Sets Pistons and Connecting Rods - Install
C9 Marine Engines and C9 Marine Generator Sets Pistons and Connecting Rods - Remove
Oil Renewal System Hardware and Schematics
2003/11/01 New Gasket For The Cylinder Block Cover {1201}
120H and 135H Motor Graders Hydraulic and Steering System Metering Pump (Steering)
C9 Marine Engines and C9 Marine Generator Sets Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Inlet and Exhaust Valves - Remove and Install
3408C, 3412C and 3412D High Performance Marine Engines Turbocharger
C9 Marine Engines and C9 Marine Generator Sets Inlet and Exhaust Valve Guides - Remove and Install
2003/10/01 New Fuel Check Valve {1262}
3408C, 3412C and 3412D High Performance Marine Engines Piston and Rings
784C, 785C and 785C HAA Off-Highway Truck/Tractor Suspension Cylinder Pressure Sensor (Rear Suspension Cylinder)
C9 Marine Engines and C9 Marine Generator Sets Crankshaft - Remove
C9 Marine Engines and C9 Marine Generator Sets Crankshaft Main Bearings - Remove
C9 Marine Engines and C9 Marine Generator Sets Crankshaft Main Bearings - Install