Flywheel - Remove
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7573 | Lifting Bracket | 2 |
| B | FT2712 | Guide Stud | 2 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) on the flywheel. Use a suitable lifting device. The weight of the flywheel is approximately
65 kg (143 lb) . - Remove two bolts (1). Install Tooling (B).
- Remove remaining bolts (1) that hold the flywheel to the crankshaft . Remove flywheel (2).
Show/hide table
Illustration 2 g01018440 - If necessary, use a hammer and a punch in order to remove ring gear (3) from the flywheel.
Show/hide table
| |
| Illustration 1 | g01018439 |
Caterpillar Information System:
C15 On-highway Engine Cylinder Head - Remove
3408C, 3412C and 3412D High Performance Marine Engines Connecting Rod
2003/09/01 A New Solenoid Provides Better Starting Conditions {1259}
3126B Industrial Engines CID 0100 FMI 04 Engine Oil Pressure short to ground
C18 Marine Generator Set Engines CID 0041 FMI 04 8 Volt DC Supply short to ground
C18 Marine Generator Set Engines CID 0041 FMI 03 8 Volt DC Supply short to +batt
C13 Engine Fan Drive Mounting Group - Remove and Install
G3406 Engines Governor Linkage - Woodward Hydra-mechanical Governor
G3406 Engines Governor Linkage - PSG Governor
G3406 Engines Governor Linkage - Woodward governor 1724
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Modes Of Operation
3500B Series II Marine Engines Starting Motor System
C15 On-highway Engine Flywheel - Install
C27 and C32 Engines for Caterpillar Built Machines CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C27 and C32 Engines for Caterpillar Built Machines CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C27 and C32 Engines for Caterpillar Built Machines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C27 and C32 Engines for Caterpillar Built Machines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C27 and C32 Engines for Caterpillar Built Machines CID 0261 FMI 13 Engine Timing Calibration required
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Acronyms
2014/07/30 New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01 New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Related Options
C15 On-highway Engine Alternator - Remove and Install