Fuel Transfer Pump - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean all components and the mating surfaces. Inspect all components. If any component is worn or damaged, use a new part for replacement.
- Install the fittings for the fuel inlet port and the fuel outlet port on fuel transfer pump (1) .
Show/hide table
 | |
| Illustration 1 | g00998914 |
- Install O-ring seal (6) on the unit injector hydraulic pump.
Show/hide table
 | |
| Illustration 2 | g00998915 |
- Position fuel transfer pump (1) on unit injector hydraulic pump (4) .
Show/hide table
 | |
| Illustration 3 | g00998906 |
- Install bolts (5). Tighten bolts (5) for fuel transfer pump (1) to a torque of 25 ± 3 N·m (18 ± 2 lb ft).
- Install tube assembly (3) and tube assembly (2). Tighten the connectors for the fuel inlet port and the fuel outlet port to a torque of 18 ± 2 N·m (13 ± 2 lb ft).
Show/hide table
 | |
| Illustration 4 | g00998361 |
Caterpillar Information System:
G3500B Engines Air/Fuel Ratio Control - Oxygen Feedback
3116 and 3126 Truck Engines Fuel Transfer Pump - Remove
G3520C and G3520E Generator Set Engines Flywheel Housing - Install
G3520C and G3520E Generator Set Engines Flywheel Housing - Remove
G3520C and G3520E Generator Set Engines Spark Plug - Remove and Install
3116 and 3126 Truck Engines Cylinder Head - Remove
3500B Marine Engines MID 036 - CID 0267 - FMI 04 Remote Shutdown Input short to ground
3500B Marine Engines MID 036 - CID 0267 - FMI 03 Remote Shutdown Input open/short to +batt
3500B Marine Engines MID 036 - CID 0267 - FMI 02 Incorrect Engine Shutdown Switch inputs
2003/06/01 SOLAS Requirement for Screening Fuel and Oil Line Connections on Marine Engines {1274, 1307}
G3520C and G3520E Generator Set Engines Exhaust Manifold - Install
G3520C and G3520E Generator Set Engines Exhaust Manifold - Remove
2003/05/01 Compression Brakes Should be Inspected Carefully During Repairs to the Cylinder Head and Valve Mechanism {1119}
3500B Engines Accessory Drive (Lower Left Hand, Reverse Rotation)
3456 Generator Sets Model View Illustrations
2003/05/01 Check OEM Web Sites for Service Letters and Information that may be Related to Product Campaigns {0374}
Cat® Digital Voltage Regulator General Information
BA-921 Bendix Air Compressor Specification
C27 and C32 Generator Sets Jacket Water Heater - Check - Standby Generator Sets (If Equipped)
C15 and C18 Petroleum Generator Sets Battery Charger - Check
G3500B Engines Cooling System
3412C Generator Set Instrument Panel - Inspect
3116 and 3126 Truck Engines Water Temperature Regulator Housing - Remove and Install
3116 and 3126 Truck Engines Water Temperature Regulator - Remove and Install