 |
|
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
| NOTICE |
|---|
|
The water separator is not a filter. It separates water from the fuel. The engine should never be allowed to run with the water level in the separator more than 1/2 full or engine damage may result. |
A water separator is recommended. The water separator should be installed between the fuel tank and the engine fuel inlet. Drain the water and sediment from the water separator on a daily basis.
- Open the drain. Catch the draining water in a suitable container. Dispose of the water properly.
Show/hide table
NOTICE The water separator is under suction during normal engine operation. Ensure that the drain valve is tightened securely to help prevent air from entering the fuel system.
- Close the drain.