1978/02/06 Caterpillar


Add New Measurement And Identification To FT904 Backlash Indicator{0653,3258}

Usage:


637 Scrapers

The FT904 Backlash Indicator is used to check the backlash (gear clearance) between the pinion and bevel gear of the differentials for tractor-scrapers. A new measurement and identification mark must be added to the FT904 Backlash Indicator for 637 Scrapers. Illustration 1 shows the correct position for the new mark. Scribe (cut) a straight line across the indicator and add the 637 Scraper identification.

Copies of the drawings needed to make the FT904 Backlash Indicator are available from your Division Service Manager.


Illustration 1. Add dimension line and identification shown.

Caterpillar Information System:

1978/02/06 Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06 Silicone Sealant Is Now Used To Keep Water Out Of The Steering Clutch Case{4059,4100,4106,4115}
1978/01/30 Air Line For Air Compressor Governor Now Connected To Outlet For Wet Air Tank{4272,1065,4278}
1978/01/30 Retaining Ring Of A New Design Now Used In Torque Converter Group{3100}
1978/01/30 Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30 Breather For Transmission Case Now Made Of Metal{3150}
1978/01/30 New Water Pump Cover Has A Baffle And Wall To Send Coolant Flow From Bypass Line Directly Into Water Pump{1361}
1978/01/30 New Spring Used In Belt Tightener And/Or Fan Drive Groups{1358,1359}
1978/01/30 Oil Strainer (Screen) Added To Turbocharger Thrust Bearing{1052,1053}
1978/01/30 Electric Fuel Pressure Gauge Now Used{7456}
1978/01/30 Rectifiers And Fuses Added To Transmission Control Wiring Increase Switch Service Life{1408,3168,3172,3173,3174}
1978/01/30 Improved Electrical Wiring Has A Separate Fuse For Each Circuit{1408}
1978/02/06 Stronger Clutch Housing Used In Variable Capacity Torque Converter{3102}
1978/02/06 Successful Engine Service-3208 Engine Booklet Is Available{1000}
1978/02/06 New Water Temperature Regulator Opens At 180°F (82°C){1350,1355,7304}
1978/02/06 Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/13 Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13 Complete Set Of Contact Points For Dial Indicators Is Now Available In One Group{0653}
1978/02/13 Several Improvements Made To Lines Group In Area Of The Hitch{5057,5077}
1978/02/13 Improvements Made To Push Frame; Instructions To Make Reinforcements On Earlier Push Frames Available{6225}
1978/02/13 Strip Added Under The Hinge For The Front Windshield On ROPS Cabs{7325}
1978/02/13 Check Degree Number On Timing Fixture Plate Assemblies{0650}
1978/02/20 New Transmission Valve Groups Increase Winch Line Pull When Transmission Is In Neutral{3150,3152,3157,3167,3100}
1978/02/20 Separate Parts Of Tire Valve Group Now Available For Parts Service{4202}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.