0105-04 Intake Manifold Air Temperature voltage low (38)
产生此代码的情况:
发动机控制模块 (ECM) 检测到以下情况:
- 进气歧管温度传感器送来的信号电压低于 0.2 VDC 超过八秒。
- ECM 至少已通电两秒钟。
系统响应:
ECM 将恢复进气歧管温度到 85°C (185.0 °F) 的缺省值。 在卡特彼勒电子技师 (ET) 中,在 "Intake Manifold Air Temperature(进气歧管空气温度)"状态的旁边将会显示 "诊断"。 ECM 会关闭冷却风扇。
无
测试步骤 1. 进行以下的诊断步骤: 发动机温度传感器开路或短路 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
3406E, C-10 and C-12 On-highway Engines 0110-03 Coolant Temperature voltage high (27)
3406E, C-10 and C-12 On-highway Engines 0110-04 Coolant Temperature voltage low (27)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0174-04 Fuel Temperature voltage low (13)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0174-03 Fuel Temperature voltage high (13)
C9 On-highway Engines Gauges and Indicators
3512B Marine Auxiliary Engine Inspecting Electrical Connectors
C-15, C-16, and C-18 Engines Fuel System
3054E Industrial Engine Fan Drive
3054E Industrial Engine Crankcase Breather
C7 and C9 On-Highway Engines Data Link Parameters
C4.4 (Mech) Industrial Engine Gear Group - Inspect
PMG3516 Power Module Overhaul (In-Frame)
3406E, C-10 and C-12 On-highway Engines 0105-03 Intake Manifold Air Temperature voltage high (38)
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Cooling System - Check - Overheating
C13, C15, and C18 Tier 4 Final Engines Connecting Rod Bearing Journal
G3406 and G3412 Generator Sets Safety Messages
3512B Marine Auxiliary Engines Flywheel Housing - Remove
G3612 and G3616 Engines Cylinder Head - Remove
3406E, C-10 and C-12 On-highway Engines 0100-03 Oil Pressure voltage high (24)
3406E, C-10 and C-12 On-highway Engines 0100-04 Oil Pressure voltage low (24)
3406E, C-10 and C-12 On-highway Engines 0102-03 Boost Pressure voltage high (25)
3406E, C-10 and C-12 On-highway Engines 0102-04 Boost Pressure voltage low (25)
C11, C13 and C15 On-highway Engines 0108-03 Barometric Pressure voltage high (26)
C11, C13 and C15 On-highway Engines 0108-04 Barometric Pressure voltage low (26)