3500 Spark Ignited Engines Caterpillar


Turbocharger

Usage:

G3516 3RC


Illustration 1g03664639
Typical example

Table 1
Specification for 113-1154 Turbocharger Gp, 7E-6708 Turbocharger Gp, 266-6711 Turbocharger Gp, 4P-4606 Turbocharger Gp, 6I-2087 Turbocharger Gp, and 6I-3959 Turbocharger Gp 
Item  Qty  Part  Specification description 
168-7800 Locknut  Before assembly, apply Loctite C5A copper anti-seize to threads and bearing surfaces.
Torque to 54 ± 5 N·m (40 ± 4 lb ft)
7W-2297 Clamp As  Use the following procedure to tighten the clamp assemblies:

1. Tighten the clamp assemblies to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in).
2. Gently hit around the clamp assemblies with a soft hammer.
3. Again, tighten the clamp assemblies to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in)
6V-2751 High Temperature Bolt  Tighten the bolts to 20.0 ± 1.5 N·m (177.0 ± 13.3 lb in) 
Install the rings so that the breaks in the rings are not aligned. Rotate the rings for approximately 45 degrees from one ring to the next ring. 

Caterpillar Information System:

C7 Urban Transit Bus Engines Customer Specified Parameters
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2002/09/01 Check Spark Plug Wires {1558}
3500 Spark Ignited Engines Turbocharger
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C-10, C-12, C-15 and C-16 Industrial Engines Can Not Reach Top Engine RPM
G3500 Engines Turbocharger
C9 Urban Transit Bus Engine Input Selections
C9 Urban Transit Bus Engine Trip Parameters
C9 Urban Transit Bus Engine Maintenance Parameters
3406E Truck Engine Slave Piston Lash - Adjust
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Assemble
G3500 Engines Turbocharger
3524B Engine for Caterpillar Built Machines Engine Oil and Water Pump Drive - Remove
G3500 Engines Turbocharger
2002/12/02 New Flexible Antenna Whip Available for Product Link {7606}
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Wireway
3524B Engine for Caterpillar Built Machines Engine Oil and Water Pump Drive - Disassemble
3524B Engine for Caterpillar Built Machines Engine Oil and Water Pump Drive - Assemble
3524B Engine for Caterpillar Built Machines Engine Oil and Water Pump Drive - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Pan - Disassemble
C9 Urban Transit Bus Engine Data Link Parameters
C-10, C-12, C-15 and C-16 Industrial Engines CID 1835 FMI 03 Auxiliary Pressure Sensor open/short to +batt
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.