Housing (Front)
Show/hide table
Illustration 1 | g00918180 |
(1) Bolt
- Tighten the bolts to the following torque. ... 35 ± 8 N·m (26 ± 6 lb ft)
(2) Bolt
- Tighten the Bolt to the following torque. ... 35 ± 8 N·m (26 ± 6 lb ft)
(3) O-ring seal and crankshaft front seal
The O-ring seal and the crankshaft front seal are part of the front housing. Lubricate the O-ring seal lightly. Use the lubricant that is being sealed.
(4) Accessory drive assembly
(5) Alignment dowel for the accessory drive
Show/hide table
Illustration 2 | g00837947 |
View A-A |
(A) The dowel extends past the surface of the housing by the following distance. ... 5.0 ± 0.5 mm (0.20 ± .02 inch)
Note: Apply 8T-9022 Silicone Gasket in order to fill the space at the connecting joint of the front housing, engine oil pan, and cylinder block.
Caterpillar Information System:
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Aftercooler - Remove and Install - Aftercooler Housing with 12 bolts
3054E and 3056E Industrial Engines Turbocharger - Inspect
3408E and 3412E Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
G3500B Engines Pistons, Rings and Connecting Rods
G3500B Engines Cylinder Block, Liners and Heads
Installation Procedure for the 223-6519 Cylinder Head Group or the 223-6521 Cylinder Head Group {1101, 1124} Installation Procedure for the 223-6519 Cylinder Head Group or the 223-6521 Cylinder Head Group {1101, 1124}
G3500B Engines Lubrication System
Installation Procedure for the 206-7748 Cylinder Head Group or the 223-6524 Cylinder Head Group {1124} Installation Procedure for the 206-7748 Cylinder Head Group or the 223-6524 Cylinder Head Group {1124}
G3516B Engines MID 036 - CID 0109 - FMI 03 Coolant Outlet Pressure open/short to +batt
Troubleshooting Compressed Air System Components and Performance{1803, 5500} Troubleshooting Compressed Air System Components and Performance{1803, 5500}
3054 and 3056 Marine Generator Set Engines Air Inlet and Exhaust System
3524B Engine for Caterpillar Built Machines Bearing Clearance - Check
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Drawings of Customer Installed Options
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
C-15, C-16, and C-18 Engines Electric Starting System - Test
C9 Engine For Caterpillar Built Machines Engine Oil Pump - Remove
3524B Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
3054E Industrial Engine Front Housing and Covers
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Turbocharger - Disassemble
3054E Industrial Engine Gear Group (Front)
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Reference Information
SR4BHV and SR4HV Electric Power Generation Connection Diagram - SR4 HV ; SR4B HV Specific Connection Diagrams