Exhaust Manifold
Show/hide table
 | |
| Illustration 1 | g00907933 |
Typical example | |
Show/hide table
 | |
| Illustration 2 | g00686961 |
View A-A | |
Show/hide table
 | |
| Illustration 3 | g00566145 |
Tightening sequence | |
(1) Stud
-
Apply 5P-3931 Anti-Seize Compound to the threads of the studs that engage the locknuts.
- Tighten the studs in the cylinder head to the following torque. ... 35 ± 5 N·m (26 ± 4 lb ft)
(2) Manifold ends
Apply engine oil to the female ends of the manifolds before assembly. Apply 2P-2333 High Temperature Sealer to the male ends of the manifolds before assembly. Remove excess sealer from the assembled joint.
(3) Locknut
- Tighten the locknuts in the numerical sequence that is shown in Illustration 3 to the following torque. ... 38 ± 5 N·m (28 ± 4 lb ft)
Caterpillar Information System:
SR4 HV and SR4B HV Generators Bearing - Lubricate
C-18 Truck Engines Sensors and Electrical Components
C-18 Truck Engines Engine Description
C-18 Truck Engines Model View Illustrations
C9 Marine Auxiliary and Generator Set Engines Engine Oil Level Gauge - Calibrate
G3520B Engines MID 033 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal
G3520B Engines MID 033 - CID 0320 - FMI 03 Speed/Timing Sensor short to +batt
3054E Industrial Engine Piston and Rings
797 and 797B Off-Highway Truck Power Train Electronic Control System Machine Speed Correction
Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561} Rework Instruction for Transformers for G3400C Engines with Tall Cylinder Heads{1409, 1550, 1561}
Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561} Rework Instruction for Transformers that are approved by the Canadian Standards Association (CSA) for G3400C Engines with Tall Cylinder Heads{1550, 1561}
3054E Industrial Engine Connecting Rod - For Use With Steel Crankshaft
C-18 Truck Engines Engine Oil Level - Check
C-18 Truck Engines Engine Oil Level Gauge - Calibrate
C-18 Truck Engines Engine Oil and Filter - Change
C-18 Truck Engines Fuel System - Prime
3406C Industrial Engine Fuel System Secondary Filter - Replace
3054E Industrial Engine Connecting Rod Bearing Journal - Steel Crankshaft
3054E Industrial Engine Crankshaft Seals
C-15 Truck Engine Water Lines
C4.4 (Mech) Industrial Engine Valve Mechanism Cover
3408C, 3412C and 3412D High Performance Marine Engines Exhaust Manifold
3054E Industrial Engine Fuel Injection Nozzles
3054C Engines for Caterpillar Built Machines Gear Group (Front)