Usage:
Bench test with SAE 10W oil @ 120°F. (49°C)
Counterclockwise rotation ... 2368 RPM
Capacity-circulation section ... 10.6 U.S. GPM(40,1 lit/min.)
Pressure ... 200 PSI(14,1 kg/cm2)
Capacity-scavenge section ... 12.7 U.S. GPM(47,9 lit/min.)
Pressure ... 0 PSI(0 kg/cm2)
On machine test:
Pressure (engine at low idle) ... 200 PSI(14,1 kg/cm2)
(engine at high idle) ... 225 PSI(15,8 kg/cm2)
Lubricating oil pressure (engine @ high idle) ... 6 ± 3 PSI(0,4 ± 0,2 kg/cm2)
(1) Clearance-gears-to-covers ... .0025 ± .0003 in.(0,064 ± 0,007 mm)
(2) Diameter-drive shaft ... .8747 ± .0003 in.(22,217 ± 0,007 mm)
Bearings bore ... .8763 ± .0003 in.(22,258 ± 0,007 mm)
(3) Diameter-idler shaft ... .8747 ± .0003 in.(22,217 ± 0,007 mm)
Bearings bore ... .8763 ± .0003 in.(22,258 ± 0,007 mm)