G3516B Engines Caterpillar


MID 036 - CID 1758 - FMI 03 Specific Humidity Sensor open/short to +batt

Usage:

G3516B 7EZ
Conditions Which Generate This Code:

The duty cycle of the pressure sensor for the specific humidity of the inlet air is greater than the maximum limit.

Additionally, neither of the following diagnostic codes are active:

  • 262 - 03 5 Volt DC Supply short to +batt

  • 262 - 04 5 Volt DC Supply short to ground

System Response:

The alarm output is activated. The code is logged.

Possible Performance Effect:

The engine performance is not affected.

Troubleshooting:

The condition indicates a possible open circuit or a short circuit.

Test Step 1. Perform the following diagnostic procedure: "PWM Sensor"

Results:

  • OK - STOP

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.