3524B Engine for Caterpillar Built Machines Caterpillar


Engine Oil Filter Base - Remove

Usage:

3524B 1AW

拆除步骤

表 1
所需工具 
工具  零件号  零件名称  数量 
138-7573  连接支架 
187-2718  滤清器扳手组件 


注意

在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。




    图 1g00891250

  1. 使用工具 (B) 拆下燃油滤清器 (1)。


    图 2g00891255

  2. 拆下机油滤清器座 (2) 上的螺栓 (3)。 拆下卡箍 (4)。


    图 3g00891466

  3. 松开螺栓 (5),使管 (6) 能够旋转。 断开管 (6)。


    图 4g00891470

  4. 断开线束组件 (7),并拆下线束组件 (8)。 使用工具 (B) 拆下机油滤清器 (9)。


    图 5g00891476

  5. 拆下螺栓 (10)。


    图 6g00891483

  6. 将工具 (A) 和适当的吊具安装到机油滤清底座 (2) 上。 拆除机油滤清器座 (2) 时,使用撬杆保持平衡。 拆下螺栓 (11)。 机油滤清器座 (2) 的重量约为 55 千克 (120 磅)

Caterpillar Information System:

3500 and 3500B High Displacement Engines for Caterpillar Built Machines Turbocharger - Install
G3500B Engines Specifications
2002/05/01 Tube Support Assemblies And Straps Have Been Removed From The 142-5625 Air Lines Gp {1071}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Turbocharger - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Temperature Regulators - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Temperature Regulators - Remove
3126B and 3126E On-highway Engines Diesel Particulate Filter Circuit - Test
3176C and 3196 Marine Engines Engine Monitoring System (EMS)
3524B Engine for Caterpillar Built Machines Camshaft Bearings - Install
3054 and 3056 Industrial and Generator Set Engines Exhaust Manifold
3054 and 3056 Industrial and Generator Set Engines Engine Design
3054 and 3056 Industrial and Generator Set Engines Engine Design
3054E Industrial Engine Glossary of Electronic Control Terms
3056E Industrial Engine Basic Engine
Installation and Initial Start-Up Procedure for G3600 Engines{1000, 1900} Installation and Initial Start-Up Procedure for G3600 Engines{1000, 1900}
2002/09/01 A New Belt Guard Group Is Available {7174}
C-15 Truck Engine Engine Design
C-15 Truck Engine Fuel Transfer Pump
G3516B Engines MID 036 - CID 1758 - FMI 03 Specific Humidity Sensor open/short to +batt
G3516B Engines MID 036 - CID 1758 - FMI 08 Specific Humidity Sensor signal abnormal
G3516B Engines MID 036 - CID 1759 - FMI 03 Exhaust Back Pressure Sensor open/short to +batt
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Install
C-15 Truck Engine Cylinder Head Valves
3524B Engines for Off-Highway Trucks Engine Will Not Crank
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.