Camshaft
Show/hide table
Illustration 1 | g00285342 |
216-7423 Camshaft Gp |
(1) Exhaust lobe
(2) Injector lobe
(3) Inlet lobe
(4) The diameter of the camshaft journal is the following size. ... 84.85 ± 0.02 mm (3.341 ± 0.0008 inch)
(5) Front of camshaft
Show/hide table
Illustration 2 | g00466866 |
(6) The height of the camshaft lobes
To find the lobe height, use the procedure that follows:
- Measure the camshaft lobe height (7) .
- Measure the base circle (8) .
- Subtract the base circle measurement (Step 1) from the camshaft lobe height (Step 2). The difference is the actual lobe lift (6) .
- The specified camshaft lobe lift (6) is the following amount.
Exhaust lobe ... 8.515 mm (0.3352 inch)
Inlet lobe ... 9.702 mm (0.3820 inch)
Injector lobe ... 10.337 mm (0.4070 inch)
The minimum permissible difference between the actual lobe lift (Step 3) and the specified lobe lift (Step 4) is 0.1 mm (0.0039 inch).
Caterpillar Information System:
G3516B Engines ECM Output Circuit (Fuel Control)
3524B Engines for Off-Highway Trucks Engine Will Not Crank
C-15 Truck Engine Cylinder Head Valves
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Install
G3516B Engines MID 036 - CID 1759 - FMI 03 Exhaust Back Pressure Sensor open/short to +batt
G3516B Engines MID 036 - CID 1758 - FMI 08 Specific Humidity Sensor signal abnormal
G3516B Engines MID 036 - CID 1758 - FMI 03 Specific Humidity Sensor open/short to +batt
C-15 Truck Engine Fuel Transfer Pump
C-15 Truck Engine Engine Design
2002/09/01 A New Belt Guard Group Is Available {7174}
Installation and Initial Start-Up Procedure for G3600 Engines{1000, 1900} Installation and Initial Start-Up Procedure for G3600 Engines{1000, 1900}
3056E Industrial Engine Basic Engine
3126E Truck Engine Cylinder Head
C-15 Truck Engine Cylinder Block
C-15 Truck Engine Cylinder Liner
C-15 Truck Engine Piston and Rings
3056E Industrial Engine Fuel System - Prime
3056E Industrial Engine Fuel System Pressure - Test
3056E Industrial Engine Engine Oil Cooler - Inspect
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
SR4 HV and SR4B HV Generators Generator - Dry
3056E Industrial Engine Fuel Injection Nozzle - Test
Marine Monitoring System II Engine Control Panel
3524B Engine for Caterpillar Built Machines Engine Oil Filter Base - Assemble