Product Identification
Caterpillar Truck Mounted Pumpers are identified with serial numbers. The serial numbers are shown on the Product Identification Plate that is mounted on the inside of the truck's cab on the driver's door.
 | |
| Illustration 1 | g00802079 |
(1) Product Identification Plate | |
Caterpillar dealers need these numbers in order to determine the components that were included with the pumper. This permits accurate identification of replacement part numbers.
Engine Identification
Caterpillar engines are identified with serial numbers, with performance specification numbers, and with arrangement numbers. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.
Caterpillar dealers need these numbers in order to determine the components that were included with the engine. This permits accurate identification of replacement part numbers.
Serial Number Plate
 | |
| Illustration 2 | g00764267 |
The Serial Number Plate is located on the right side of the cylinder block near the rear of the engine.
The following information is stamped on the Serial Number Plate: engine serial number, engine model and arrangement number.
Information Plate
 | |
| Illustration 3 | g00764335 |
The Information Plate is on the valve cover. The following information is on the Information Plate: engine serial number, engine model, engine arrangement number, maximum altitude, horsepower, high idle, full load rpm, fuel settings and other information.