Water Pump - Remove and Install
- Turn disconnect switch (1) to the OFF position.
- Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 2 g03727501 - Open hood assembly (2).
Show/hide table
Illustration 3 g02511246 - Disconnect hoses (3) and (4).
Show/hide table
Illustration 4 g02511247 - Disconnect hose assembly (5). Disconnect hoses (7) and (8). Disconnect harness assembly (6).
Show/hide table
Illustration 5 g02511287 - Remove elbow assembly (9).
Show/hide table
Illustration 6 g02511290 - Disconnect hoses (10).
Show/hide table
Illustration 7 g02511296 - Remove bolts (14), water pump (13), and gasket (12) from front cover (11).
- Remove bolts (15), cover (17), and gasket (16).
Show/hide table
Illustration 1 | g06069008 |
- Install water pump (13) in the reverse order of removal.
- Tighten bolts (14) in the sequence that is shown in Illustration 8 to a torque of
22 N·m (195 lb in) .
Show/hide tableIllustration 8 g01985813 - Tighten bolts (14) in the sequence that is shown in Illustration 8 to a torque of
Caterpillar Information System:
538 Forest Machine Engine Supplement Cooling System Package (Radiator, Hydraulic Oil Cooler) - Remove and Install
450F Backhoe Loader Fuel Tank Strainer - Replace
Installation of the 501-4884 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 501-4884 Front Lines Gp on Certain Hydraulic Excavators {5057}
Installation Procedure for 502-1741 Wiring Group for Certain Hydraulic Excavators {1408} Installation Procedure for 502-1741 Wiring Group for Certain Hydraulic Excavators {1408}
Installation of the 513-0990 Coupler Control Ar on Certain Hydraulic Excavators {6129} Installation of the 513-0990 Coupler Control Ar on Certain Hydraulic Excavators {6129}
Installation of the 502-1732 Medium Pressure Wiring {1408} Installation of the 502-1732 Medium Pressure Wiring {1408}
Installation of the 513-0970 Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {5051} Installation of the 513-0970 Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {5051}
320D2 FM Forestry Machine Engine Supplement Belt Tensioner - Remove and Install
538 Forest Machine Engine Supplement Water Temperature Regulator - Remove and Install
New Monitor Software Is Now Available for Certain 311F, 312Fand 313F Excavators {7610, 7620} New Monitor Software Is Now Available for Certain 311F, 312Fand 313F Excavators {7610, 7620}
M314F and M316F Wheeled Excavators Fuel System Primary Filter (Water Separator) Element - Replace
M314F and M316F Wheeled Excavators Fuel System Water Separator - Drain
815K Soil Compactor and 816K Landfill Compactor Location of Components (Power Train System)
345D, 349D and 349D2 Excavators Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
320D2 FM Forestry Machine Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
M314F and M316F Wheeled Excavators Fuel System Filter - Replace
M314F and M316F Wheeled Excavators Hydraulic System Oil Filter (Return) - Replace - In-line Filters
815K Soil Compactor and 816K Landfill Compactor Systems Hydraulic Tank
312D2 and 313D2 Excavators Capacities (Refill)
New Machine Software Group Is Now Used on Certain Excavators and Mobile Hydraulic Power Units {7610, 7620} New Machine Software Group Is Now Used on Certain Excavators and Mobile Hydraulic Power Units {7610, 7620}
New Bellows (Flexible Tube) for the Exhaust Muffler is Now Available for Certain Excavators {1062} New Bellows (Flexible Tube) for the Exhaust Muffler is Now Available for Certain Excavators {1062}
M314F and M316F Wheeled Excavators Hydraulic System Oil Filter (Fan Drive) - Replace
558 LL GF Forest Machine Engine Supplement Crankshaft Front Seal - Remove and Install