3054 and 3056 Engines 550 Generator Set Control Panel Caterpillar


System Information

Usage:

3054 CHN
When the DC power supply is activated, the display will show information about the module.


Illustration 1g00845170

Table 1
Code Letter     Meaning     Options     Detail    
M     Module Type     550 NS 4W     Auto-start module variant with no Sync option, 4 wire (3ph+N) connection.    
550 CS 4W Auto-start module variant with Check Sync option, 4 wire (3ph+N) connection.    
555 NS 4W Automatic Mains Failure Module Variant with no Sync option, 4 wire (3ph+N) connection.    
555 CS 4W Automatic Mains Failure Module Variant with Check Sync option, 4 wire (3ph+N) connection.    
S     System Options     00     Basic Metering Version    
01 Enhanced Metering Version    
C     Custom Options     00     No options fitted    
01 RS232 Comms Board fitted    
02 RS485 Comms Board fitted    
V     Software Version     X.XX     Details internal software revision (FLASH version)    

Caterpillar Information System:

3126 Truck Engine (Military) Engine Oil Pressure - Test
3126 Truck Engine (Military) Engine Valve Lash - Inspect/Adjust
385B Excavator Swing Gear - Lubricate
3054 and 3056 Industrial and Generator Set Engines Engine Valve Lash - Inspect/Adjust
3126 Truck Engine (Military) Fuel System - Inspect
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Rotor Position Sensor - Adjust - The Procedure for the Setting of The Rotor Position Sensor Gap
Power Module Switchgear (Low Voltage and Medium Voltage) Reference Material
Power Module Switchgear (Low Voltage and Medium Voltage) Electrical System
Power Module Switchgear (Low Voltage and Medium Voltage) General Hazard Information
3126 Truck Engine Military Engine Oil Filter Base - Remove
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Motor - Disassemble
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Motor - Remove
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Motor - Assemble
3408E and 3412E Industrial Engines Engine Oil Temperature Sensor
3408E and 3412E Industrial Engines Temperature Sensor (Auxiliary)
Power Module Switchgear (Low Voltage and Medium Voltage) Electrical Connections - Check
3126B and 3126E On-highway Engines Fan Drive Mounting Group - Remove and Install
C12 Marine Engine General Information
C12 Marine Engine Electronic Control System Components
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Motor - Install
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Final Drive - Remove
C12 Marine Engine Air Inlet and Exhaust System
3408E and 3412E Industrial Engines Injection Actuation Pressure Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.