Engine Oil Filter Base - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench Assembly | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
 | |
| Illustration 1 | g00851068 |
Engine Mounted Oil Filter Base
- Remove the oil supply lines (4) .
- Remove the oil line adapter (3) .
- Remove oil filter base (2) .
Remote Mounted Oil Filter Base
- Remove the engine oil filter assembly (8) with tool (A) .
- Remove the bolts (1) and (6) that hold the oil filter base (7) to the mounting plate. Remove the engine oil filter base.
Caterpillar Information System:
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Motor - Disassemble
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Motor - Remove
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Brake Valve - Assemble
Electronic Modular Control Panel II (EMCP II) GSC CID 0331 - FMI 02
Electronic Modular Control Panel II (EMCP II) GSC CID 0330 - FMI 07
Electronic Modular Control Panel II (EMCP II) GSC CID 0248 - FMI 09
3126 HEUI Industrial Engine Flywheel - Install
3126 HEUI Industrial Engine Flywheel - Remove
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Operating Parameters
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Brake Valve - Disassemble
3126B and 3126E On-highway Engines Fuel Level Sensor Circuit - Test
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines General Information
Power Module Switchgear (Low Voltage and Medium Voltage) General Hazard Information
Power Module Switchgear (Low Voltage and Medium Voltage) Electrical System
Power Module Switchgear (Low Voltage and Medium Voltage) Reference Material
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Rotor Position Sensor - Adjust - The Procedure for the Setting of The Rotor Position Sensor Gap
3126 Truck Engine (Military) Fuel System - Inspect
3054 and 3056 Industrial and Generator Set Engines Engine Valve Lash - Inspect/Adjust
385B Excavator Swing Gear - Lubricate
3126 Truck Engine (Military) Engine Valve Lash - Inspect/Adjust
3126 Truck Engine (Military) Engine Oil Pressure - Test
3054 and 3056 Engines 550 Generator Set Control Panel System Information
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Motor - Assemble
3408E and 3412E Industrial Engines Engine Oil Temperature Sensor