Lines (Rear Attachment)
Show/hide table
| |
| Illustration 1 | g03843323 |
Show/hide table
| Specification for 458-8268 Rear Attachment Lines | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| - | Sharp corners at each strap cutting edge shall not be allowed. | ||
| 1 | 1 | 356-9194 Hose As | Torque to |
| 2 | 1 | 206-5123 Tee As | Torque to |
| 3 | 1 | 424-4595 Hose As | Torque to |
| 4 | 1 | 275-1819 Tube As | Torque to |
| 5 | 2 | 148-8370 Elbow As | Torque to |
| 6 | 2 | 8T-4196 Bolt | Torque to |
| 7 | 1 | 424-4594 Hose As | Torque to |
Show/hide table
| |
| Illustration 2 | g03843324 |
|
View of area A | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 8 | 1 | 108-7581 Hose As | Torque to |
| 9 | 1 | 464-9518 Hose As | Torque to |
| 10 | 1 | 150-3036 Elbow As | Torque to |
| 11 | 1 | 111-6746 Hose As | Torque to |
| 12 | 1 | 148-8443 Tee | Torque to |
| 13 | 1 | 5I-4190 Hose As | Torque to |
Caterpillar Information System:
C4.4 and C7.1 Engines Cooling Fan Control - Test
330F MHPU Mobile Hydraulic Power Unit Access Door and Cover Locations
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Monitoring System
349F XE and 352F XE Excavators Machine System Specifications Main Hydraulic Pump
Quick Disconnect Fittings Leaking on Certain Mini Hydraulic Excavators{5057, 6129} Quick Disconnect Fittings Leaking on Certain Mini Hydraulic Excavators{5057, 6129}
305.5E2 Mini Hydraulic Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
323D2, 326D2 and 330D2 Excavators and 330D2 MHPU Machine Electronic Control System Solenoid Valve - Test
323D2, 326D2 and 330D2 Excavators and 330D2 MHPU Machine Electronic Control System Sensor Signal (PWM) - Test
323D2, 326D2 and 330D2 Excavators and 330D2 MHPU Machine Electronic Control System Switch Circuits - Test
349F XE and 352F XE Excavators Machine System Specifications Wiring (Platform)
Procedure for Software Enabled Attachments (SEA) of Cat Production Measurement (CPM) Application on Certain Excavators {7610, 7620} Procedure for Software Enabled Attachments (SEA) of Cat Production Measurement (CPM) Application on Certain Excavators {7610, 7620}
A Procedure to Improve the Cab Sealing Performance on Certain Excavators{7310} A Procedure to Improve the Cab Sealing Performance on Certain Excavators{7310}
C4.4 and C7.1 Engines Cooling Fan Reversing - Test
2015/06/05 Improved Quick Coupler Inspection Intervals and Maintenance Procedures Are Available {6129}
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Seat
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Air Conditioning and Heating Control
330F MHPU Mobile Hydraulic Power Unit Additional Messages
2015/06/12 An Improved Solenoid and Relief Valve Group is Available for Certain 320D to 345D and 345E to 349E Excavators {5571}
374F Excavator Machine Systems Boom Swing Priority - Adjust
Replacement Procedure of the Solenoid Coil Assembly in the Solenoid and Relief Valve Group on Certain Excavators and Mobile Hydraulic Power Units{5571} Replacement Procedure of the Solenoid Coil Assembly in the Solenoid and Relief Valve Group on Certain Excavators and Mobile Hydraulic Power Units{5571}
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Capacities (Refill)
2015/08/19 An Improved Upper Cover Sheet Assembly is Now Used on Certain 312F and 313F Excavators {7251, 7276}
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Coolant Tank (Expansion) - Remove and Install
349F XE and 352F XE Excavators Machine System Specifications Main Control Valve