Fuel Shutoff Solenoid - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect all electrical connections to the fuel shutoff solenoid before proceeding. Mark the connections or identify the connections for later installation.
- Remove bolts (2) that secure fuel shutoff solenoid (1) to the engine.
Show/hide table
 | |
| Illustration 1 | g00823298 |
- Remove fuel shutoff solenoid (1) and the gasket from the engine.
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Put a new gasket and fuel shutoff solenoid (1) in position on the engine.
Show/hide table
| | |
| Illustration 2 | g00823298 |
- Install bolts (2) that secure fuel shutoff solenoid (1) to the engine. Tighten the bolts to a torque of 9 N·m (80 lb in).
- Reconnect all electrical connections to the fuel shutoff solenoid before you operate the engine.
Caterpillar Information System:
330B Excavator Machine System Specifications Track Carrier Roller
Automatic Transfer Switches CTG, CTGD Series Safety Signs and Labels
3500B and 3500 Marine Propulsion Engines with EUI Option Gauges and Indicators
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - HDB Series Alternator
CPT372 Truck Mounted Pumper Turbocharger - Inspect
3512B and 3512C Engines For Caterpillar Built Machines Fuel System Operation
3054 and 3056 Marine Generator Sets Reference Material
3054 and 3056 Marine Generator Sets Walk-Around Inspection
3054 and 3056 Marine Generator Sets Overhaul Considerations
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - HDB Series Alternator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 147-9437 Generator through 147-9497 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1811 Generator through 144-1951 Generator
Automatic Transfer Switches CTG, CTGD Series Installation Information
PM820, PM822, and PM825 Cold Planer Leaving the Machine
2001/09/01 Check the Air Compressor Before Installation {1803}
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Deck Start/Run/Kill Switch
G3612 and G3616 Engines Engine Valve Lash - Inspect/Adjust
3512B and 3512C Engines For Caterpillar Built Machines Pinion Drive - Check
2001/09/01 A New Speed Sensor is Available for Some Turbocharger Groups {1052}
G3600 Engines Reference Material
3034 Marine Engine Fuel Lines - Remove and Install
C-10 and C-12 Engines Maintenance Interval Schedule - C-12 Industrial Engines
G3600 Engines Engine Monitoring System
CPT372 Truck Mounted Pumper Refill Capacities