Pinion Drive - Check
Show/hide table
 | |
| 图 1 | g00823410 |
空气起动马达 (1) 进气端口 (2) 出口 (3) 安装法兰的表面 (4) 小齿轮表面 | |
- 外加 345 kPa (50 PSI) 的压力到进气端口 (1) 。 小齿轮应该向外移动。 空气应从出气端口 (2) 逸出。
- 螺塞出气端口 (2) 。 外加 1034 kPa (150 PSI) 到进气端口 (1) 。
- 测量从安装法兰 (3) 到小齿轮表面 (4) 的距离。 小齿轮完全伸出的时候，距离应为 69 ± 2 mm (2.72 ± 0.08 in)。
- 移除进气端口 (1) 上 的压力。
- 测量从安装法兰 (3) 到小齿轮表面 (4) 的距离。 小齿轮完全缩回的时候，距离应为45 ± 2 mm (1.77 ± 0.08 in)。
- 如果这些尺寸不在这些技术规格范围之内，应更换磨损或损坏的零件。
Caterpillar Information System:
G3612 and G3616 Engines Engine Valve Lash - Inspect/Adjust
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Deck Start/Run/Kill Switch
2001/09/01 Check the Air Compressor Before Installation {1803}
PM820, PM822, and PM825 Cold Planer Leaving the Machine
Automatic Transfer Switches CTG, CTGD Series Installation Information
3034 Marine Engine Fuel Shutoff Solenoid - Remove and Install
330B Excavator Machine System Specifications Track Carrier Roller
Automatic Transfer Switches CTG, CTGD Series Safety Signs and Labels
3500B and 3500 Marine Propulsion Engines with EUI Option Gauges and Indicators
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - HDB Series Alternator
CPT372 Truck Mounted Pumper Turbocharger - Inspect
3512B and 3512C Engines For Caterpillar Built Machines Fuel System Operation
2001/09/01 A New Speed Sensor is Available for Some Turbocharger Groups {1052}
G3600 Engines Reference Material
3034 Marine Engine Fuel Lines - Remove and Install
C-10 and C-12 Engines Maintenance Interval Schedule - C-12 Industrial Engines
G3600 Engines Engine Monitoring System
CPT372 Truck Mounted Pumper Refill Capacities
Automatic Transfer Switches CTS, CTSD Series Output Option Connections of the Controller
3512B Engine Safety Messages
C-10 and C-12 Engines Maintenance Interval Schedule - C-10 Industrial Engines
3034 Marine Engine Water Temperature Regulator Housing - Remove and Install
3054 and 3056 Marine Generator Sets Starting the Engine
2001/10/01 Caterpillar Recommends The Use Of 144-3450 Cylinder Head Gasket {1124}