A New Speed Sensor is Available for Some Turbocharger Groups {1052}
- Engine:
- 3606 (S/N: 8RB)
- 3608 (S/N: 6MC; 8LL)
- 3612 (S/N: 9RC; 9FR)
- 3616 (S/N: 1PD)
Reference: See Special Instructions, REHS0285, "Disassembly and Assembly of the Napier NA 297 Turbocharger".
Description of Change: A new turbocharger speed sensor is available for some of the turbochargers on these engines. The turbocharger speed sensor is used in order to measure the rotational speed of the turbocharger in RPM. The speed is monitored and an alarm is generated when the speed of the turbocharger exceeds 35000 RPM.
Adaptable To: The new 200-8029 Speed Sensor is a direct replacement for the former 164-5336 Speed Sensor. The new 200-8029 Speed Sensor is adaptable to the turbocharger groups in the list that follows:
Show/hide table
 | |
| Illustration 1 | g00780497 |
This illustrates the location of the speed sensor. (1) Compressor Housing (2) Speed Sensor (3) Locknut | |
Caterpillar Information System:
3512B and 3512C Engines For Caterpillar Built Machines Pinion Drive - Check
G3612 and G3616 Engines Engine Valve Lash - Inspect/Adjust
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Deck Start/Run/Kill Switch
2001/09/01 Check the Air Compressor Before Installation {1803}
PM820, PM822, and PM825 Cold Planer Leaving the Machine
Automatic Transfer Switches CTG, CTGD Series Installation Information
3034 Marine Engine Fuel Shutoff Solenoid - Remove and Install
330B Excavator Machine System Specifications Track Carrier Roller
Automatic Transfer Switches CTG, CTGD Series Safety Signs and Labels
3500B and 3500 Marine Propulsion Engines with EUI Option Gauges and Indicators
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - HDB Series Alternator
CPT372 Truck Mounted Pumper Turbocharger - Inspect
G3600 Engines Reference Material
3034 Marine Engine Fuel Lines - Remove and Install
C-10 and C-12 Engines Maintenance Interval Schedule - C-12 Industrial Engines
G3600 Engines Engine Monitoring System
CPT372 Truck Mounted Pumper Refill Capacities
Automatic Transfer Switches CTS, CTSD Series Output Option Connections of the Controller
3512B Engine Safety Messages
C-10 and C-12 Engines Maintenance Interval Schedule - C-10 Industrial Engines
3034 Marine Engine Water Temperature Regulator Housing - Remove and Install
3054 and 3056 Marine Generator Sets Starting the Engine
2001/10/01 Caterpillar Recommends The Use Of 144-3450 Cylinder Head Gasket {1124}
3512B Petroleum Engines with the ADEM 2 Electronic Control Module MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs