Housing (Front) - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在拆卸凸轮轴齿轮时，不要转动曲轴或凸轮轴。 如果在安装时没有正确调整前齿轮总成的正时，活塞与气门之间将会发生干涉，进而导致发动机损坏。 |
- 将前壳 (6) 安置到发动机上。
Show/hide table
 | |
| 图 1 | g01032876 |
- 安装螺母 (2) 、螺柱 (3) 和螺栓 (4) 。
- 安装前发动机支架 (5) 。
- 安装绑带 (1) 。
End By:
- 安装交流发电机。 请参阅 拆解和组装, "交流发电机 - 拆卸和安装"。
- 安装曲轴前油封。 请参阅 拆解和组装, "曲轴前密封 - 安装"。
- 安装凸轮轴齿轮。 请参阅 拆解和组装, "凸轮轴齿轮 - 拆卸和安装"。
- 安装热交换器。 请参阅 拆解和组装热交换器, "- 安装"。
Caterpillar Information System:
2001/08/01 New Spacers and Gaskets Are Being Used On The Turbocharger Oil Supply Line and Turbocharger Oil Drain Line {1307}
3406E and C15 Marine Engines Housing (Front) - Remove
3500B and 3500B High Displacement Generator Set Engines Digital Sensor Supply
3500B and 3500B High Displacement Generator Set Engines Analog Sensor Supply
385B Excavator Equipment Lowering with Engine Stopped
G3406 Engines Connecting Rod and Main Bearing Journals
3003, 3013, 3014 and 3024 Industrial Engines Cooling System Coolant (DEAC) - Change
3003, 3013, 3014 and 3024 Industrial Engines Cooling System Coolant (ELC) - Change
3500B and 3500 Marine Propulsion Engines with EUI Option Specifications
3406C Marine Auxiliary Generator Set Reference Numbers
2001/07/01 New Connecting Rods And A New Connecting Rod Bearing Are Used {1218, 1230}
G3406 Engines Connecting Rod
C18 Generator set and C18 Marine Engines Cylinder Head - Remove
2001/08/01 Look up FLS and FTS Values for Rerates. {7620}
G3500 Engines Ignition System
C18 Generator set and C18 Marine Engines Cylinder Head - Install
G3406 Engines Flywheel Housing
2001/07/01 New Spacers and Gaskets Are Being Used On The Turbocharger Oil Supply Line and The Turbocharger Oil Drain Line {1052}
2001/07/01 Default Settings Have Been Changed On Generator Set Ground Fault Monitors {1404}
G3406 Engines Accessory Drive
G3600 Engines Electronic Control (Combustion Sensor)
2001/09/01 A New Accumulator Is Used In The Hydrax System {1716}
3456 Generator Sets Parallel Operation
3456 Generator Sets Voltage Regulators