Electronic Control (Combustion Sensor)
Show/hide table
 | |
| 图 1 | g01274444 |
(1) 接头
(2) 延长杆
(3) 燃烧传感器
-
每次安装燃烧传感器之前，使用新的 108-3515 衬垫 。
- 将燃烧传感器拧紧至以下扭矩： ... 38 ± 2 N·m (28 ± 1 lb ft)
- 燃烧传感器的接线柱与中央电极之间的电阻不得超过以下值。 ... 5 欧姆
- 燃烧传感器必须通过接线柱与中央电极之间的低电压持续性检查。 ... 15 VDC
- 燃烧传感器的接线柱与中央电极之间的电阻不得超过以下值。 ... 5 欧姆
Caterpillar Information System:
G3406 Engines Accessory Drive
2001/07/01 Default Settings Have Been Changed On Generator Set Ground Fault Monitors {1404}
2001/07/01 New Spacers and Gaskets Are Being Used On The Turbocharger Oil Supply Line and The Turbocharger Oil Drain Line {1052}
G3406 Engines Flywheel Housing
C18 Generator set and C18 Marine Engines Cylinder Head - Install
G3500 Engines Ignition System
2001/08/01 Look up FLS and FTS Values for Rerates. {7620}
C18 Generator set and C18 Marine Engines Cylinder Head - Remove
3406E Marine Engine Housing (Front) - Install
2001/08/01 New Spacers and Gaskets Are Being Used On The Turbocharger Oil Supply Line and Turbocharger Oil Drain Line {1307}
3406E and C15 Marine Engines Housing (Front) - Remove
3500B and 3500B High Displacement Generator Set Engines Digital Sensor Supply
2001/09/01 A New Accumulator Is Used In The Hydrax System {1716}
3456 Generator Sets Parallel Operation
3456 Generator Sets Voltage Regulators
3500B and 3500B High Displacement Generator Set Engines Engine Sensor Open/Short Test
3500B and 3500B High Displacement Generator Set Engines Engine Speed/Timing Sensor
3500B and 3500B High Displacement Generator Set Engines Prelubrication System
3456 Generator Sets Voltage Regulator Options
3456 Generator Sets Generator Lead Connections
3456 Generator Sets Voltage Connections
3608 Engine Marine Monitoring System Using LED Indicators to Troubleshoot Modules
3054 and 3056 Marine Generator Set Engines Camshaft Gear - Remove and Install
G3500 Engines Cylinder Block, Liners and Heads